Spartacote 72% Solids Super Fast Drying Polyaspartic Coating - Clear Gloss

Gloss Finish

Product Description

The 72% Solids Super Fast Drying Polyaspartic Coating - made by Spartacote is a 2 layer super resistant resistant polyaspartic coating system that dries within 1-2 hours of application. It is extremely durable against acids/chemicals, abrasions, hot/cold temperatures, oils, and fluids. It applies easily and requires no special skills to install. Can be used outdoors as it does not yellow like epoxies. Gloss finish only. Coverage approximately 250 square ft/gal. Please chose option for gloss or low gloss finish. This Kit comes in 2 Gal (Gloss) and 3.3 Gal Sets (Low Gloss).

Working time 20-25 minutes under standard 70 degree conditions.

Can be used as a topcoat or standalone coating. For colored/pigmented version see ‘Tintable Spartacote’ . Non skid additives can be added to the product or broadcast on. Two coats are required for best results.

Product Information:

  • 2-part clear polyaspartic coating (Mix ratio: 1 Part A:1 Part B). 2 Coats recommended for best results.

Please ensure to order proper amount per square footage needed for 2X coats. Ie. If you are covering a 500 sq.ft garage you will need 4 gallons of product.

Fore 100% solids version of this product please email us at for pricing. 

Key Features

High Performance
  • Superior top-coat chemical & stain resistance. Gloss finish
  • Low Odor. Complies with all current EPA standards
  • Dries up to 8-10 mils thick
Long Lasting
  • Our floors virtually never fail. Our Standard floor warranty is included on all flooring products
  • Cold-Weather Cure (-30ºF)
  • Excellent Impact & Abrasion resistance
  • UV Resistant
Anti Slip Surface
  • Micro-media agents may be added for increased traction
Easy to Clean
  • Just use soap and water to clean time and time again
  • Available in a Gloss or Low Gloss finish.
  • 1 Day Installation can be done with this product! Requires no special skills to apply

Application Uses

  • Residential Garages
  • Basements
  • Outdoor Surfaces
  • Freight Entrances
  • Laundry Rooms
  • Retail Showrooms
  • Building Storage Areas
  • Auto Shops
  • Day Care Centers
  • Docking Stations
  • Boiler rooms
  • Building Entry/Exit Pathways
  • Virtually Any Concrete Surface!


 2 Gal Set

500 sq.ft

*Please note depending on how thick or thin you apply the coating coverage will vary. If your floor is more porous it will require more epoxy. If you are applying on new, smooth concrete then you will use less epoxy. Appx coverage is 250 sq.ft per Gal



    Related Items