Spartacote 72% Solids Super Fast Drying Polyaspartic Coating - Tintable Gloss
$499.00
Product Description
The 72% Solids Super Fast Drying Polyaspartic Coating - made by Spartacote is a 2 layer acid and chemical resistant polyaspartic coating system that dries within 1-2 hours of application. It is extremely durable against acids/chemicals, abrasions, hot/cold temperatures, oils, and fluids. It applies easily and requires no special skills to install. Can be used outdoors as it does not yellow like epoxies. Gloss finish only (can be top-coated with the Flex SB Low Gloss for low gloss requirements. Please email directly to inquire). Working time 15-20 minutes under standard 70 degree conditions.
This product features a 2 step process. First apply the polyaspartic coating with flecks (optional). Wait 2-3 hours for the coat to dry and then apply a second coat. This coating is best used where time is of the essence. Working time after mixing each batch is appx 20 minutes depending on temperature. The Super-Fast Drying Industrial Polyaspartic comes standard in 'clear' and is field tinted with our pigment packs. Colored Flecks can be added to this system but if you order this we will automatically fill the order will clear gloss topcoat.
Product Information:
- 2-part polyaspartic coating (Mix ratio: 1 Part A:1 Part B). Colored with Tintable Pigment Pack
- 2-part polyaspartic coating (Mix ratio: 1 Part A:1 Part B). Clear Gloss
- Colored Pigment Pack
Choose from over 15 colors for you floor! Custom color are available upon request. Bright colors such as red, yellow, white, and other lighter colors require greater pigmentation. Please inquire to find out pricing.
Please type what color flecks you would like to add to your floor coating in the comments section. We include 3 lbs per 2 Gal Kit. You will throw the flecks onto your floor after you lay down the initial epoxy coating and then seal the floor with the clear gloss topcoat.
IF YOU DO NOT PROVIDE A FLECK COLOR WE WILL NOT SEND ANY FLECKS.
Please ensure to order proper amount per square footage needed for 2X coats. Ie. If you are covering a 500 sq.ft garage you will need 4 gallons of product.
Fore 100% solids version of this product please email us at info@epoxycentral.com for pricing.
Key Features
High Performance
- Superior top-coat chemical & stain resistance. gloss finish
Eco-Friendly
- Low Odor. Complies with all current EPA standards
Thickness
- Dries up to 8-10 mils thick
Long Lasting
- Our floors virtually never fail. Our Standard floor warranty is included on all flooring products
Weather
- Cold-Weather Cure (-30ºF)
Resistance
- Excellent Impact & Abrasion resistance
UV
- UV Resistant
Anti Slip Surface
- Micro-media agents may be added for increased traction
Easy to Clean
- Just use soap and water to clean time and time again
Colors
- Available in a Clear Gloss and Low-Gloss (satin) finish as well as 15 colors
Installation
- 1 Day Installation can be done with this product! Requires no special skills to apply
Application Uses
- Residential Garages
- Basements
- Outdoor Surfaces
- Freight Entrances
- Laundry Rooms
- Retail Showrooms
- Building Storage Areas
- Auto Shops
- Day Care Centers
- Docking Stations
- Boiler rooms
- Building Entry/Exit Pathways
- Virtually Any Concrete Surface!
Coverage
|
2 Gal Set 500 sq.ft |
4 Gal Set 1000 sq/ft |
10 Gal Set 2500 sq/ft |
*Please note depending on how thick or thin you apply the coating coverage will vary. If your floor is more porous it will require more epoxy. If you are applying on new, smooth concrete then you will use less epoxy. Appx covergae is 250 sq.ft per Gal
Colors
Related Items
Commando Coat 100X - 2 Layer Epoxy Coating Kit
$1.99
Product Description
The Commando Coat 100X - 2 Layer Epoxy Coating Kit is a two layer two part epoxy coating kit. Simply enter your desired square footage amount and the price will automatically be calculated.
This system features a single layer of epoxy/primer followed by a protective urethane topcoat. This build up of two coatings strengthens the epoxy bond allowing for your floor to resist acids/chemicals, abrasions, hot/cold temperatures, dirt and grim from foot traffic, fluid spills and anything else you might get on your floor! It features and easy to clean surface using a mop or wet-vac. This coating is ideal for warehouses studios, basements, storage areas, retail showrooms and any other residential flooring that is concrete based.
Note: Please note that VOC laws have recently changed. If you are located in one of these states we will manually fill your order with the Low VOC version which is VOC compliant by EPA standards and adjust the price accordingly when processed. CA, CT, DE, IL, IN, MD, MA, ME, NJ, NY, OH, PA, RI, VA, KY and all of Canada.
Choose from over 15 colors for you floor! All colored coatings comes with pigments packs which you add when you are mixing.
OPTIONAL:
Please type what color flecks you would like to add to your floor coating in the comments section. We include 3 lbs per 2 Gal Kit. You will throw the flecks onto your floor after you lay down the initial epoxy coating and then seal the floor with the clear topcoat.
Product Information
- 2 Part 93% Solids Medium Build Self Priming Epoxy Coating
- 2 Part Flexible Aliphatic Polyurethane Floor Sealer
Each Kit Includes
- Prep/etch solution for prepping the floor
- Roller pad
- Roller frame
- Mixing stick/Metal Mixer
- Non-skid additive
- Mixing Bucket with liner
- Instructions
- Spike Shoes* (only comes with the purchase of 1000 sq/ft or more)
Key Features
High Performance
- Resistant to common chemicals, car fluids, and cleaning products
Eco-Friendly
- Complies with all current EPA standards
Thickness
- Dries up to 12-15 mils thick
Long Lasting
- Our floors virtually never fail. Our Standard floor warranty is included on all flooring products
Wear Resistant
- Exemplifies great resistance against everyday use
Hot Tire Pickup
- Extremely reliable against hot tire pickup
Anti Slip Surface
- Slip resistant with our non skid additive
Easy to Clean
- Just use soap and water to clean time and time again
Installation
- Requires no special skills to apply
Application Uses
- Warehouses
- Freight Entrances
- Broadcast Studios
- Laundry Rooms
- Retail Showrooms
- Muesuems
- Building Storage Areas
- Auto Shops
- Day Care Centers
- Docking Stations
- Boiler rooms
- Building Entry/Exit Pathways
Size and Coverage
By the Square Foot. 500 sq.ft Minimum
*Please note depending on how thick or thin you apply the coating coverage will vary. If your floor is more porous it will require more epoxy. If you are applying on new, smooth concrete then you will use less epoxy.
Colors
Commando Coat 200X - 3 Layer Epoxy Flooring Kit
$3.19
Product Description
The Commando Coat 200X - 3 Layer Epoxy Flooring Kit is a commercial grade three layer high performance coating system. This kit features a single layer of epoxy primer, single layer of epoxy coating, and standard topcoat along with our decorative flooring chips. This 3 layer floor system is ideal for commercial or home use where the floor is subject to daily use and activity. The 3 layer build up provides you with the a super durable floor that can withstand high impact falls, chemicals, cleaners, car fluids, any other substance that might get onto your floor. It features and easy to clean surface using a mop or wet-vac. This coating is ideal for garages, repair shops, warehouses, and any other flooring that is concrete based. The decorative chips (optional) will hide imperfections and give you floor that wow factor!
You will receive :
- Primer - Single Layer Epoxy Primer Low VOC
- Basecoat - 100% Solids High Build Epoxy Coating
- Topcoat - UV Resistant Polyurethane Topcoat
We give you everything you need to properly install your epoxy coating.
Choose from over 15 colors for you floor and over 40 solid colors of decorative flecks! Clear and custom epoxy colors are available upon request. Bright colors such as red, yellow, white, and other lighter colors require greater pigmentation. Please inquire to find out pricing.
Please note that VOC laws have recently changed. If you are located in one of these states we will substitute the Standard Topcoat for the Low VOC version which is VOC compliant by EPA standards. Affected States are: CA, CT, DE, IL, IN, MD, MA, ME, NJ, NY, OH, PA, RI, VA, KY and all of Canada.
Please type what color flecks you would like to add to your floor coating in the comments section. We include 5 lbs per 500 sq/ft. You will throw the flecks onto your floor after you lay down the initial epoxy coating and then seal the floor with the clear topcoat. See the Decorative Flecks Page to view all colors.
Each Kit Includes
- Prep/etch solution for prepping the floor
- Roller pad
- Roller frame
- Mixing stick/Metal Mixer
- Non-skid additive
- Mixing Bucket with liner
- Instructions
- Decorative Flecks (5lbs per 500 sq.ft)
- Spike Shoes*
Key Features
High Performance
- Super resistant against chemicals, car fluids, and cleaning products
Eco-Friendly
- All three layers have Low VOC’s and comply with EPA standards
Strength
- Dries up to 20-30 mils thick
Wear Resistant
- Extremely Scratch Resistant with the Pro Residential Standard Topcoat
Hot Tire Pickup
- Extremely reliable against hot tire pickup
Easy to Clean
- Just use soap and water to clean time and time again
Anti Slip Surface
- Slip resistant with our non skid additives
Life Span
- Our floors virtually never fail. Our Standard floor warranty is included on all flooring products
Installation
- Requires no special skills to apply
Application Uses
- Residential Garages
- Car Repair Shops
- Commercial Storage Areas
- Home workstations
- Day Care Centers
- Playrooms
Sizes and Coverage
By the Square Foot. 500 sq.ft Minimum
*Please note depending on how thick or thin you apply the coating coverage will vary. If your floor is more porous it will require more epoxy. If you are applying on new, smooth concrete then you will use less epoxy.
Colors
Each Kit Includes
- Prep/etch solution for prepping the floor
- Roller pad
- Mixing stick
- Non-skid additive
- Mixing Bucket
- Instructions
- Spike Shoes* (only comes with the purchase of 1000 sq/ft or more)
Commando Coat 300X - Chemical and Acid Resistant Epoxy Novolac Coating Kit
$2.99
Product Description
The Commando Coat 300X - Chemical and Acid Resistant Epoxy Novolac Coating Kit is a two layer acid and chemical resistant novolac coating system. Simply enter your desired square footage amount and the price will automatically be calculated.
This system features a single layer of enhanced epoxy novolac primer followed by a single layer of novolac topcoat. This 2 layer floor coating system is ideal for use in hostile environments where chemical/acid resistance is of the utmost importance. We suggest using this on chemical factories, breweries, wineries, distilleries, processing plants, battery storage rooms, chrome plating facilities, and other similar applications.
This 2 layer coating is specifically designed for application where splash/spill of acids, chemicals, and solvents occur frequently. The 2 layer build up strengthens your floor by allowing the primer ”grip” to the concrete and then letting the topcoat bond to the primer resulting in a super strong build of highly effective floor coatings. This floor can also withstand normal wear and tear, impact falls, PH cleaners, fluids, any other substance that might get onto your floor. It is super easy to clean, just use a mop or wet vac and have you floor looking like new in no time.
You will receive:
- Base/Primer Coat - Self Priming Chemical Resistant Epoxy Novolac Coating
- Topcoat - Chemical Resistant Epoxy Novolac Topcoat
Choose from over 3 colors for you floor! Clear and custom color are available upon request. Bright colors such as red, yellow, white, and other lighter colors require greater pigmentation. Please inquire to find out pricing.
*Colors or gloss may be affected by high/low temperature, extreme lighting exposure. Clear version is available special order with UV inhibitors to prevent yellowing. Please call or email to order.
EACH KIT INCLUDES
- Prep/etch solution for prepping the floor
- Roller pad
- Roller frame
- Mixing stick/Metal Mixer
- Non-skid additive
- Mixing Bucket with liner
- Instructions
- Spike Shoes* (only comes with the purchase of 1000 sq/ft or more)
Key Features
High Performance
- Super High Chemical/Acid Resistant
Eco-Friendly
- Low Odor. Complies with all current EPA standards
Thickness
- Dries up to 15-20 mils thick
Long Lasting
- Our floors virtually never fail. Our Standard floor warranty is included on all flooring products
Temperature
- Can be used in hot wash down areas
Finish
- Attractive High-Gloss Finish
Anti Slip Surface
- Use our non skid additive to increase traction of the floor
Easy to Clean
- Just use soap and water to clean time and time again
Installation
- Requires no special skills to apply
Application Uses
- Chemical Factories
- Storage Tanks
- Breweries, Wineries, Distilleries
- Food Processing plants
- Battery Storage Rooms
- Chrome plating facilities
- Other similar applications
Coverage
Colors
Commando Coat 400X - Super Thick Slurry Coating Kit
$6.99
Product Description
The Commando Coat 400X - Super Thick Slurry Coating Kit is an aggregate-enhanced, 4-component urethane slurry epoxy. Simply enter your desired square footage amount and the price will automatically be calculated.
This coating can withstand extremely high/low temperatures and is thermal shock proof providing a great coating for hot wash down areas. This is our thickest and most durable coating system! It features self-leveling capabilities and is formulated for older/corroded floors where there are high levels of pitting and smoothing out the floor is a main focus.
This thick aggregate-enhanced coating is used by commercial food packagers and some of the country’s largest breweries, wineries, and distilleries. It is highly resistant to damage due to it’s 8,400 psi compressive strength (about twice the strength of concrete!). This product is one of the best long term flooring solutions on the market.
Kit Components:
- Urethane slurry cement epoxy kit (Part A, Part B, aggregate filler, and pigment pack)
- Acid/chemical resistant military grade 2-part protective topcoat.
- Broadcast media (Silica)
Instructions:
- Mix up the contents of slurry kit (A, B, aggregate filler, and pigment pack)
- Apply with gauge rake
- While wet, broadcast silica sized “00” or “40” mesh until the floor begins to reject it. Application rate is appx. 10 lbs/kit, or ¼ lb/sq.ft. *We will send you the silica broadcast. For delivery please note these only come in 50lb bags.
- Topcoat with the acid and chemical resistant military grade 2-part protective topcoat.
Notes:
- Commando Coat 400X is highly resistant to moisture and can be applied to a damp floor. Extremely resistant to thermal shock from steam and hot water cleaning. Acid/chemical resistant protective topcoat included.
- Commando Coat 400X requires the floor to be shot blasted for proper adhesion. Cannot be applied over existing coatings or tile.
- Please note that you will need to add the pigment pack while you are mixing to tint the color of the epoxy. We supply you with the desired colored pigment pack.
- Minimum sq.ft required to purchase is 800 square feet.
Only available in 3 colors. Tile Red, Medium Gray, and Tan
Key Features
High Performance
- Super Moisture and Chemical Resistant
Eco-Friendly
- Complies with all current EPA standards
Strength
- Thermal Shock Proof and 8,400 psi compressive strength
Thickness
- Dries up to 125 mils thick (1/8 inch)
Temperature
- Heat/Cold Resistant. Can be used in hot wash down areas
Wear Resistant
- Extremely Scratch Resistant with the Pro Residential Standard Topcoat
Hot Tire Pickup
- Extremely reliable against hot tire pickup
Easy to Clean
- Just use soap and water to clean time and time again
Installation
- Requires no special skills to apply
Application Uses
- Chemical Factories
- Processing plants
- Breweries, Wineries, Distilleries
- Food packaging plants
- Beverage Packing facilities
- Virtually any Floor!
Sizes and Coverage
| Priced by the sq.ft |
*Please note depending on how thick or thin you apply the coating coverage will vary. If your floor is more porous it will require more epoxy. If you are applying on new, smooth concrete then you will use less epoxy.
Colors
Kit Contents
- Industrial roller pads
- Industrial roller frames
- Special ‘gauge rake’
- Air release spiked roller to eliminate possible entrained air bubbles.
- Mixing stick
- Mixing bucket liner
- Mixing bucket
- Instructions
- Pigment Pack
- Silica broadcast media
- Spike Shoes (for walking on wet floor during application)