The Polyurethane Military Grade Topcoat is a single layer 2 component flexible aliphatic polyurethane floor sealer that boosts excellent chemical and abrasion resistance. It works great against weather and is UV stabilized. It features a super resistant nonslip smooth finish that makes it extremely easy to clean using a mop or wet-vac.
This product has a 2:1 mix ratio by volume. Simply mix two gallons of part A with 1 gallon of part B and add the antislip aggregate to the mixture. Please make sure to mix thoroughly and only mix as much as you need so as not to waste. You will be able to coat appx 350 sq/ft per gallon at 5 mils thick.
This product can be used as a topcoat with most other Epoxy Central base and primer coatings and will add an extra protected non slip layer to your floor to help withstand the wear and tear it receives. You can choose to add decorative flecks to your flooring system. Simply add decorative flecks into the epoxy or primer before applying this coating to add texture, hide imperfections and give your floor that wow factor! Choose from hundreds of color variations
If you would like to add more texture to your floor coating please make sure to buy the armor-grip which is a nonskid additive that gets mixed into this topcoat. Simply pour 1 Package per Gallon and mix throughly into your topcoat mixture. Make sure to mix every couple of minutes as the non-skid will fall to the bottom of the mixture.
*Please note that VOC laws have recently changed. If you are located in one of these states please select the Low VOC version which is the same product but VOC compliant by EPA standards. CA, CT, DE, IL, IN, MD, MA, ME, NJ, NY, OH, PA, RI, VA, KY and all of Canada. If you do not select the Low VOC version and are located in one of the above states we will manually fill your order with the Low VOC version and adjust the price accordingly when processed.
**Colors or gloss may be affected by high/low temperature, extreme chemical and lighting exposure.
The Crack Repair Putty is a two component 100% solids epoxy crack filler that you mix together to fill all types of cracks, dinges, joints expansions, and hairline fractures in your floor. It goes on like ‘spackle’ but is 5X stronger than concrete, and has 4X the bonding power to concrete vs. mortar type crack repairs. It can fill cracks up to 3/16″ deep and several inches wide without the use of aggregates.
To apply simply scoop out equal parts of “A” and “B” (mix ratio of 1:1) and mix on a piece of cardboard until evenly mixed. Then apply with putty knife or trowel just like you would with a painters spackle. It can be coated over IMMEDIATELY, even if the floor is not fully cured yet!
Coverage is 500 lineal feet of 1/8″ x 1/8″ size cracks for the qt size kit and 2,000 lineal feet for the 2 gal kit. You will get less coverage for larger cracks. This product is only available in gray. You can paint epoxy right over it!
Note: This product can also be used on vertical walls.
500 Lineal Feet
The Oil Stop Primer is designed for floors where oils spills, grease, petroleum, and other alike chemicals or substances have penetrated deep into the concrete contaminating it. This unique 2 part primer allows epoxy coatings to bond the floor preventing beading on stained surfaces. This product works great with any our epoxy paint coatings but better than that this product will virtually work with any epoxy product on the market.
The Epoxy Trak Textured Roller is required for use with the Super-Duty Epoxy Trak Coating Textured Version. This special roller allows the coating to be evenly distributed due to the the textured granules. It also helps prevent uneven applications.
Coverage is 200 sq.ft per roller. This product comes in 4 inch and 9 inch versions.
Highly Durable Textured Roller
1 Textured Roller
200 square feet
The Commando Coat 100X - 2 Layer Epoxy Coating Kit is a two layer two part epoxy coating kit. Simply enter your desired square footage amount and the price will automatically be calculated.
This system features a single layer of epoxy/primer followed by a protective urethane topcoat. This build up of two coatings strengthens the epoxy bond allowing for your floor to resist acids/chemicals, abrasions, hot/cold temperatures, dirt and grim from foot traffic, fluid spills and anything else you might get on your floor! It features and easy to clean surface using a mop or wet-vac. This coating is ideal for warehouses studios, basements, storage areas, retail showrooms and any other residential flooring that is concrete based.
Note: Please note that VOC laws have recently changed. If you are located in one of these states we will manually fill your order with the Low VOC version which is VOC compliant by EPA standards and adjust the price accordingly when processed. CA, CT, DE, IL, IN, MD, MA, ME, NJ, NY, OH, PA, RI, VA, KY and all of Canada.
Choose from over 15 colors for you floor! All colored coatings comes with pigments packs which you add when you are mixing.
Please type what color flecks you would like to add to your floor coating in the comments section. We include 3 lbs per 2 Gal Kit. You will throw the flecks onto your floor after you lay down the initial epoxy coating and then seal the floor with the clear topcoat.
By the Square Foot. 500 sq.ft Minimum
*Please note depending on how thick or thin you apply the coating coverage will vary. If your floor is more porous it will require more epoxy. If you are applying on new, smooth concrete then you will use less epoxy.