$449.00
The 72% Solids Super Fast Drying Polyaspartic Coating - made by Spartacote is a 2 layer super resistant resistant polyaspartic coating system that dries within 1-2 hours of application. It is extremely durable against acids/chemicals, abrasions, hot/cold temperatures, oils, and fluids. It applies easily and requires no special skills to install. Can be used outdoors as it does not yellow like epoxies. Gloss finish only. Coverage approximately 250 square ft/gal. Please chose option for gloss or low gloss finish. This Kit comes in 2 Gal (Gloss) and 3.3 Gal Sets (Low Gloss).
Working time 20-25 minutes under standard 70 degree conditions.
Can be used as a topcoat or standalone coating. For colored/pigmented version see ‘Tintable Spartacote’ . Non skid additives can be added to the product or broadcast on. Two coats are required for best results.
Product Information:
Please ensure to order proper amount per square footage needed for 2X coats. Ie. If you are covering a 500 sq.ft garage you will need 4 gallons of product.
Fore 100% solids version of this product please email us at info@epoxycentral.com for pricing.
|
2 Gal Set 500 sq.ft |
*Please note depending on how thick or thin you apply the coating coverage will vary. If your floor is more porous it will require more epoxy. If you are applying on new, smooth concrete then you will use less epoxy. Appx coverage is 250 sq.ft per Gal
$299.00
***PLEASE NOTE THAT THIS PRODUCT IS ON BACKORDER DUE TO SUPPLY CHAIN ISSUES. ORDERS WILL BE TAKEN AND FULFILLED IN THE ORDER THEY ARE RECEIVED. APPROXIMATE SHIP DATE IS EARLY JULY 2022.
The PP200 - 2 Part Pool Paint an industrial grade 2-part epoxy high build coating formulated to give maximum protection to your swimming pool. Used by governments and municipalities for coating their pools. High solids formulation helps to hide minor divots and imperfections in surfaces and will ‘smooth out’ pool surfaces. This product is super easy to use. Just open, mix, pour and apply!
Satin finish. Self-priming, no primer required. The PP-200 coating is an economical alternative to replastering.
This coating can be applied over most types of epoxy pool coatings in good condition, as well as bare concrete, plaster, gunite and fiberglass. Can be used in jacuzzi’s and hot tubs.
Dries quickly, durable, and resists fading, blistering, chemicals and abrasion.
Mix ratio is 1:1. Designed for maximum protection against UV rays, automatic pool cleaning machines and chlorine.
Coverage is 75-125 square feet/gallon (150-250 sq.ft per kit) on initial coat. Each set includes 1 gallon of part A and 1 gallon of part B to make a 2 gal mix. This product will yield more on recoats. Coverage will be 125-200 sq ft/gal (250-400/kit). Two coats are required for maximum durability and warranty.
Life span can be 8-10 years!
2 year warranty!
|
1 Gal 75-125 sq.ft *2 coats required |
1 Kit (2 Gals) 150-250 sq.ft *2 coats required |
$119.00
The PP100 - 1 Part Pool Paint is a no mix low VOC heavy duty pool paint. This product is super easy to use. Just open, pour and apply!
This coating is effective on both new and old pools, can be applied over existing chlorinated rubber pool paints, in addition to bare plaster and concrete surfaces. If you’ve just installed a new pool, or are simply repairing your old pool, the PP100 coating will help you complete your project faster as it does not require much time to dry. This coating is designed to last and will leave the internal surfaces of your pool stronger than ever and able to resist fading, chemicals, and abrasions over time.
Coverage is 300 square feet/gallon per coat (two coats required). Can be used on most coated surfaces except epoxy pool paint and Jacuzzis/spas, concrete or fiberglass. Please see the PP200 - 2 Part Pool Paint for these applications surfaces.
Available in White, Dawn Blue and Black. 1 Gal size only. Can be used with our Skid Tex non skid additive on areas such as steps and areas where slippage could be of concern. Two coats required!
One year warranty.
*PLEASE NOTE ORDERS ON THIS PRODUCT SHIP WITHIN 10-14 BUSINESS DAYS OF PURCHASE. IF YOU ARE SETTING A TIMELINE FOR YOUR PROJECT PLEASE TAKE SHIPPING TIMES INTO CONSIDERATION.
|
1 Gal 300 sq.ft *2 coats required |
$349.00
The EC8000X is a low VOC water based epoxy primer and stain blocker. This low VOC product is easy to apply, maintain, and clean on virtually any indoor or outdoor substrate. This product is UV resistant and does not yellow. Decorative flakes can be added to this coating to help hid floor imperfections and give your floor that WOW factor. This product is sold in 2.5 Gal sets for the colored version 1 Gallon sets for the clear. Coverage is appx 300 sq.ft per gal for both colored and clear.
1-2 coats of clear will give the floor a ‘polished concrete’ look at an economical price.
VOC is less than 50g/l, meeting the most stringent California environmental laws in all CA counties.
Fast drying (2-3 hours per coat and can be open to foot traffic in just hours).
EC8000X s a 2-part product and comes in pre-measured containers for easy mixing by simply pouring the Part B into the Part A container, and then mix well. Thickness 3-5 mils. Long working time of approximately 1 hour in normal temperatures. Coverage will vary depending on desired thickness and density of the floor. More porous and rough floors will require more coating yielding a lower coverage.
Please note that the clear has a slight amber cast to it so to avoid any minor ambering of surface apply the clear coat thinly.
If you are looking to add decorative flakes then application will be:
Choose from Gray, Beige, and Clear (Satin Finish) versions.
This product is not suitable for wood substrates. Please refer to our other products that can be used on wood substrates.
|
Colored 2.5 Gal Set appx. 750 sq.ft |
Clear 1 Gal Set appx. 300 sq.ft |
$369.99
The High Solids Low Odor Urethane Topcoat is a three component high solids aliphatic urethane floor finish that exhibits excellent characteristics for abrasion resistance, chemical resistance, flexibility, weathering and UV stability. It has little to no odor making it a great topcoat for areas that require LOW VOCs and is legal for use in all 50 states.
This product comes in a kit with Part A & B and includes a pack of non skid Additive. Product is clear and is tintable with a urethane color pack. To make a color, you must make a selection on checkout and mix in the pack when mixing the product. Use 1 pint of color for each gallon of topcoat.
DO NOT APPLY THIS COATING WITHOUT FIRST USING A PRIMER OR BASECOAT.
For thin mil systems please use the Single Layer Epoxy Primer Low VOC in clear for clear coating OR in a color that matches the color pack of this product.
For high build systems please use 100% Solids High Build Coating in a matching color for the base coat.
Available in two sizes 1 gallon & 4 gallon. Coverage is approximately 500 sq ft/gal @ 3.2 mils wet.
Color packs available for this product line are white, off white, light gray, medium gray, charcoal gray, tile red, tan, light blue and blue
Instructional Video Below!
|
1 Gallon 500 sq.ft @ 3 Mils |
4 Gallons 2000 sq.ft @ 3 Mils |
Color packs available for this product line are white, off white, light gray, medium gray, charcoal gray, tile red, tan, light blue and blue
