$119.00
The Crack Repair Putty is a two component 100% solids epoxy crack filler that you mix together to fill all types of cracks, dinges, joints expansions, and hairline fractures in your floor. It goes on like ‘spackle’ but is 5X stronger than concrete, and has 4X the bonding power to concrete vs. mortar type crack repairs. It can fill cracks up to 3/16″ deep and several inches wide without the use of aggregates.
To apply simply scoop out equal parts of “A” and “B” (mix ratio of 1:1) and mix on a piece of cardboard until evenly mixed. Then apply with putty knife or trowel just like you would with a painters spackle. It can be coated over IMMEDIATELY, even if the floor is not fully cured yet!
Coverage is 500 lineal feet of 1/8″ x 1/8″ size cracks for the qt size kit and 2,000 lineal feet for the 2 gal kit. You will get less coverage for larger cracks. This product is only available in gray. You can paint epoxy right over it!
Note: This product can also be used on vertical walls.
|
Quart
500 Lineal Feet |
2 Gal |
$159.99
EC-1X is a three component 100% solids epoxy mortar designed for cove base surface applications. This product has specially selected aggregate and ingredients to provide easy construction of cove bases with the use of a marginal trowel or other cove base application tools. We include the Cover Mortar Primer with purchase of this product. We also sell the coving application tool we recommend for installation of this product.
Components
Instructional Video Below!
$89.99
The Epoxy Mortar Patch Kit is a 3 component 100% solids epoxy mortar. Designed for application uses where excellent wear resistance and strength is necessary such as pallet jacks, forklifts, heavy traffic areas and steel-wheeled equipment.
Each kit is comprised of 2 components of A & B along with the special aggregate. All 3 components get mixed together to form the super strong and durable epoxy mortar that is troweled onto the floor. This product exhibits amazing adhesion and resists ‘pop out’ like cement-type patches.
|
2 Gal Kit (.11 CU FT) 5.3 sq ft @ 1/4″ thick |
5 Gal Kit (.45 CU FT) 21.6 sq ft @ 1/4″ thick |
Bulk Kit (2.25 CU FT) 108 sq ft @ 1/4″ thick |
$123.99
This two component water based colored epoxy coating is designed for applications to vertical surfaces at a high build while resisting sags or slumps. We recommend this product for use on cement or concrete block applications. If your substrate is extremely porous or degrading we recommend also using a primer before applying this product.
*Porous surfaces will soak up more paint.
Note: Standard lead times are 7-10 business days plus transit time.
Price is per Gallon
|
1 Gal
120 sq.ft @ 15 mils
|
