If you can paint a wall you can paint a floor!
With the growing demand for cost efficient high performance coatings Epoxy Central has manufactured a family of DIY Floor Coating kits called the Commando Coat. Our kits include everything you need to finish an installation. Items included are as follows.
We have a variety of coatings for virtually any flooring project. The systems below are sold by the sq.ft. Simply enter your desired coverage area amount in the quantity section. An example is shown below.
$1.99
The Commando Coat 100X - 2 Layer Epoxy Coating Kit is a two layer two part epoxy coating kit. Simply enter your desired square footage amount and the price will automatically be calculated.
This system features a single layer of epoxy/primer followed by a protective urethane topcoat. This build up of two coatings strengthens the epoxy bond allowing for your floor to resist acids/chemicals, abrasions, hot/cold temperatures, dirt and grim from foot traffic, fluid spills and anything else you might get on your floor! It features and easy to clean surface using a mop or wet-vac. This coating is ideal for warehouses studios, basements, storage areas, retail showrooms and any other residential flooring that is concrete based.
Note: Please note that VOC laws have recently changed. If you are located in one of these states we will manually fill your order with the Low VOC version which is VOC compliant by EPA standards and adjust the price accordingly when processed. CA, CT, DE, IL, IN, MD, MA, ME, NJ, NY, OH, PA, RI, VA, KY and all of Canada.
Choose from over 15 colors for you floor! All colored coatings comes with pigments packs which you add when you are mixing.
OPTIONAL:
Please type what color flecks you would like to add to your floor coating in the comments section. We include 3 lbs per 2 Gal Kit. You will throw the flecks onto your floor after you lay down the initial epoxy coating and then seal the floor with the clear topcoat.
By the Square Foot. 500 sq.ft Minimum
*Please note depending on how thick or thin you apply the coating coverage will vary. If your floor is more porous it will require more epoxy. If you are applying on new, smooth concrete then you will use less epoxy.
$3.19
The Commando Coat 200X - 3 Layer Epoxy Flooring Kit is a commercial grade three layer high performance coating system. This kit features a single layer of epoxy primer, single layer of epoxy coating, and standard topcoat along with our decorative flooring chips. This 3 layer floor system is ideal for commercial or home use where the floor is subject to daily use and activity. The 3 layer build up provides you with the a super durable floor that can withstand high impact falls, chemicals, cleaners, car fluids, any other substance that might get onto your floor. It features and easy to clean surface using a mop or wet-vac. This coating is ideal for garages, repair shops, warehouses, and any other flooring that is concrete based. The decorative chips (optional) will hide imperfections and give you floor that wow factor!
You will receive :
We give you everything you need to properly install your epoxy coating.
Choose from over 15 colors for you floor and over 40 solid colors of decorative flecks! Clear and custom epoxy colors are available upon request. Bright colors such as red, yellow, white, and other lighter colors require greater pigmentation. Please inquire to find out pricing.
Please note that VOC laws have recently changed. If you are located in one of these states we will substitute the Standard Topcoat for the Low VOC version which is VOC compliant by EPA standards. Affected States are: CA, CT, DE, IL, IN, MD, MA, ME, NJ, NY, OH, PA, RI, VA, KY and all of Canada.
Please type what color flecks you would like to add to your floor coating in the comments section. We include 5 lbs per 500 sq/ft. You will throw the flecks onto your floor after you lay down the initial epoxy coating and then seal the floor with the clear topcoat. See the Decorative Flecks Page to view all colors.
By the Square Foot. 500 sq.ft Minimum
*Please note depending on how thick or thin you apply the coating coverage will vary. If your floor is more porous it will require more epoxy. If you are applying on new, smooth concrete then you will use less epoxy.
$2.99
The Commando Coat 300X - Chemical and Acid Resistant Epoxy Novolac Coating Kit is a two layer acid and chemical resistant novolac coating system. Simply enter your desired square footage amount and the price will automatically be calculated.
This system features a single layer of enhanced epoxy novolac primer followed by a single layer of novolac topcoat. This 2 layer floor coating system is ideal for use in hostile environments where chemical/acid resistance is of the utmost importance. We suggest using this on chemical factories, breweries, wineries, distilleries, processing plants, battery storage rooms, chrome plating facilities, and other similar applications.
This 2 layer coating is specifically designed for application where splash/spill of acids, chemicals, and solvents occur frequently. The 2 layer build up strengthens your floor by allowing the primer ”grip” to the concrete and then letting the topcoat bond to the primer resulting in a super strong build of highly effective floor coatings. This floor can also withstand normal wear and tear, impact falls, PH cleaners, fluids, any other substance that might get onto your floor. It is super easy to clean, just use a mop or wet vac and have you floor looking like new in no time.
You will receive:
Choose from over 3 colors for you floor! Clear and custom color are available upon request. Bright colors such as red, yellow, white, and other lighter colors require greater pigmentation. Please inquire to find out pricing.
*Colors or gloss may be affected by high/low temperature, extreme lighting exposure. Clear version is available special order with UV inhibitors to prevent yellowing. Please call or email to order.
$6.99
The Commando Coat 400X - Super Thick Slurry Coating Kit is an aggregate-enhanced, 4-component urethane slurry epoxy. Simply enter your desired square footage amount and the price will automatically be calculated.
This coating can withstand extremely high/low temperatures and is thermal shock proof providing a great coating for hot wash down areas. This is our thickest and most durable coating system! It features self-leveling capabilities and is formulated for older/corroded floors where there are high levels of pitting and smoothing out the floor is a main focus.
This thick aggregate-enhanced coating is used by commercial food packagers and some of the country’s largest breweries, wineries, and distilleries. It is highly resistant to damage due to it’s 8,400 psi compressive strength (about twice the strength of concrete!). This product is one of the best long term flooring solutions on the market.
Kit Components:
Instructions:
Notes:
Only available in 3 colors. Tile Red, Medium Gray, and Tan
Priced by the sq.ft |
*Please note depending on how thick or thin you apply the coating coverage will vary. If your floor is more porous it will require more epoxy. If you are applying on new, smooth concrete then you will use less epoxy.
$2.29
Commando Coat 500X - High Performance Flexible Urethane Coating, single-pack, totally flexible, slip-resistant, waterproof protective polyurethane coating with self-contained recycled rubber granules for an attractive tough textured finish. Simply enter your desired square footage amount and the price will automatically be calculated.
When exposed to atmospheric moisture, Commando Coat 500X undergoes a chemical curing process which changes it from a liquid to a tough polyurethane membrane. It has excellent abrasion and chemical resistance. It is easy to apply, simply just roll it out! Ideal for boat decks, balconies, patios, houseboats, salt water exposure, docks, sidewalks, and thousands of other uses.
Commando Coat 500X is available in 4 versions: Indoor Smooth @ $2.29/sq ft, Indoor Textured @ $3.29/sq ft, Outdoor Smooth @ $2.99/ft, and Outdoor Textured @ 3.99/sq ft. *Clear color is not available in indoor version, only outdoor. Textured includes 1 coat of smooth, 1 coat of textured.
Minimum order is 150 square feet.
If ordering Textured version, please order 1 textured roller per 200 square feet.
Please note that colors of textured Commando Coat 500X are greatly affected by the addition of granules (which make it textured rather than smooth). We strongly advise you to order samples if color is an important factor.
Smooth |
Indoor |
*By the Square Foot. 150 sq.ft Minimum. Please note depending on how thick or thin you apply the coating coverage will vary.
$1,499.00
The Commando Coat 600X - 100% Solids Metallic Epoxy Kit is a 3 layer metallic epoxy coating kit. This DIY kit includes material and appliances for a 600 sq.ft space (equivalent of a standard 2-car garage).
Create endless patterns and designs with metallic powders to make your floor the highlight of your home.
Coverage results vary with surface porosity, floor texture, application methods and technique. Heavier applications and rougher surfaces will yield less coverage.
What do you get with the kit?
Coverage results vary with surface porosity, floor texture, application methods and technique. Heavier applications and rougher surfaces will yield less coverage.
Priming with contrasting colors (normally black) primer is required.
Instructions:
Notes:
Available in a variety of metallic colors. This system can be used with any metallic powder on the market if you can not find a color choice of your liking
600 sq.ft Kit Covers standard 2 car gargae. |
*Please note depending on how thick or thin you apply the coating coverage will vary. If your floor is more porous it will require more epoxy. If you are applying on new, smooth concrete then you will use less epoxy.
$499.00
The 72% Solids Super Fast Drying Polyaspartic Coating - made by Spartacote is a 2 layer acid and chemical resistant polyaspartic coating system that dries within 1-2 hours of application. It is extremely durable against acids/chemicals, abrasions, hot/cold temperatures, oils, and fluids. It applies easily and requires no special skills to install. Can be used outdoors as it does not yellow like epoxies. Gloss finish only (can be top-coated with the Flex SB Low Gloss for low gloss requirements. Please email directly to inquire). Working time 15-20 minutes under standard 70 degree conditions.
This product features a 2 step process. First apply the polyaspartic coating with flecks (optional). Wait 2-3 hours for the coat to dry and then apply a second coat. This coating is best used where time is of the essence. Working time after mixing each batch is appx 20 minutes depending on temperature. The Super-Fast Drying Industrial Polyaspartic comes standard in 'clear' and is field tinted with our pigment packs. Colored Flecks can be added to this system but if you order this we will automatically fill the order will clear gloss topcoat.
Product Information:
Choose from over 15 colors for you floor! Custom color are available upon request. Bright colors such as red, yellow, white, and other lighter colors require greater pigmentation. Please inquire to find out pricing.
Please type what color flecks you would like to add to your floor coating in the comments section. We include 3 lbs per 2 Gal Kit. You will throw the flecks onto your floor after you lay down the initial epoxy coating and then seal the floor with the clear gloss topcoat.
IF YOU DO NOT PROVIDE A FLECK COLOR WE WILL NOT SEND ANY FLECKS.
Please ensure to order proper amount per square footage needed for 2X coats. Ie. If you are covering a 500 sq.ft garage you will need 4 gallons of product.
Fore 100% solids version of this product please email us at info@epoxycentral.com for pricing.
2 Gal Set 500 sq.ft |
4 Gal Set 1000 sq/ft |
10 Gal Set 2500 sq/ft |
*Please note depending on how thick or thin you apply the coating coverage will vary. If your floor is more porous it will require more epoxy. If you are applying on new, smooth concrete then you will use less epoxy. Appx covergae is 250 sq.ft per Gal
$449.00
The 72% Solids Super Fast Drying Polyaspartic Coating - made by Spartacote is a 2 layer super resistant resistant polyaspartic coating system that dries within 1-2 hours of application. It is extremely durable against acids/chemicals, abrasions, hot/cold temperatures, oils, and fluids. It applies easily and requires no special skills to install. Can be used outdoors as it does not yellow like epoxies. Gloss finish only. Coverage approximately 250 square ft/gal. Please chose option for gloss or low gloss finish. This Kit comes in 2 Gal (Gloss) and 3.3 Gal Sets (Low Gloss).
Working time 20-25 minutes under standard 70 degree conditions.
Can be used as a topcoat or standalone coating. For colored/pigmented version see ‘Tintable Spartacote’ . Non skid additives can be added to the product or broadcast on. Two coats are required for best results.
Product Information:
Please ensure to order proper amount per square footage needed for 2X coats. Ie. If you are covering a 500 sq.ft garage you will need 4 gallons of product.
Fore 100% solids version of this product please email us at info@epoxycentral.com for pricing.
2 Gal Set 500 sq.ft |
*Please note depending on how thick or thin you apply the coating coverage will vary. If your floor is more porous it will require more epoxy. If you are applying on new, smooth concrete then you will use less epoxy. Appx coverage is 250 sq.ft per Gal
Sign up to get the latest on sales, new releases and more …
© 2023 Epoxy Central. All rights reserved Powered by Shopify