Tools, Supplies, and Accessories
Oil Stop Primer
$119.00
Description
The Oil Stop Primer is designed for floors where oils spills, grease, petroleum, and other alike chemicals or substances have penetrated deep into the concrete contaminating it. This unique 2 part primer allows epoxy coatings to bond the floor preventing beading on stained surfaces. This product works great with any our epoxy paint coatings but better than that this product will virtually work with any epoxy product on the market.
Key Features
High Performance
- Super resistant against chemicals, car fluids, and cleaning products
Eco-Friendly
- 70% Solids
Thickness
- Dries up to 7 mils thick
Strength
- Super durable when used with our epoxy products. Allows for any even stronger bond between the floor and epoxy
Hot Tire Pickup
- Extremely reliable against hot tire pickup
Easy to Clean
- Just use soap and water to clean time and time again
Versatile
- Can be used with most epoxy products
Life Span
- Our floors virtually never fail. Our Standard floor warranty is included on all flooring products
Application Uses
- Residential
- Commercial
- Food and beverage Facilities
- Basements
- Equipment Rooms
- Virtually any concrete surface!
Coverage
|
1/2 Gal 100-125 sq.ft |
2 Gal 400-500 sq.ft |
Colors
Aluminum Oxide Non Skid Additive (by the lb)
$10.00
The aluminum oxide non skid additive (grit) is a powdered metal, super hard, non skid high wear additive is added to your coating to give it a super resistant non...
Crack Repair Epoxy Putty
$119.00
Description
The Crack Repair Putty is a two component 100% solids epoxy crack filler that you mix together to fill all types of cracks, dinges, joints expansions, and hairline fractures in your floor. It goes on like ‘spackle’ but is 5X stronger than concrete, and has 4X the bonding power to concrete vs. mortar type crack repairs. It can fill cracks up to 3/16″ deep and several inches wide without the use of aggregates.
To apply simply scoop out equal parts of “A” and “B” (mix ratio of 1:1) and mix on a piece of cardboard until evenly mixed. Then apply with putty knife or trowel just like you would with a painters spackle. It can be coated over IMMEDIATELY, even if the floor is not fully cured yet!
Coverage is 500 lineal feet of 1/8″ x 1/8″ size cracks for the qt size kit and 2,000 lineal feet for the 2 gal kit. You will get less coverage for larger cracks. This product is only available in gray. You can paint epoxy right over it!
Note: This product can also be used on vertical walls.
Product Information
- Two Component 100% solids epoxy crack Filler
Key Features
Eco-Friendly
- 100% Solids. Has less than 11 g/l VOC
Easy to use
- Goes on like spackle. Just mix and apply
Versatile
- Can be used on virtually any horizontal or vertical surface
High Performing
- 8,710 psi Compressive Strength
Strong
- 5x as strong as concrete
Long Lasting
- Will not crack or fade over time
Seamless Finish
- When covered with our epoxy, cracks and joints will blend into the floor
Application Uses
- Garages
- Storage areas
- Work Stations
- Warehouses
- Breweries and wineries
- Repair shops
- Auto Body Shops
- Retail spaces
- Virtually any concrete surface!
Sizes and Coverage
|
Quart
500 Lineal Feet |
2 Gal |
Colors
Epoxy Trak Textured Roller
$14.99
Description
The Epoxy Trak Textured Roller is required for use with the Commando Coat 500X - High Performance Flexible Urethane Coating. This special roller allows the coating to be evenly distributed due to the textured granules. It also helps prevent uneven applications.
Coverage is 200 sq.ft per roller. This product comes in 4 inch and 9 inch versions.
Product Information
-
Highly Durable Textured Roller
Key Features
Design
- Roller is specifically designed to be used with The Commando Coat 500X Coating Kit (standard paint rollers will not distribute paint evenly and disintegrate quickly as the coating is heaving)
Durability
- Extremely durable. The Plastic core allows you to cut down the roller to custom size
Application
- Makes application of the The Super-Duty Epoxy Trak easy
Life Span
- Each roller will be good for one use. Simply throw away when finished
Application Uses
- Warehouses
- Commercial
- Military hangers
- Pedestrian walkways
- Truck beds
- Ramps
- Loading docks
- Bridges
- Metal and Wooden Steps
- Catwalks
- Ship Decks
- Marine applications
- Boats
- Storage tanks
- Handicap ramps
- Pools and spas
- Sealing rusty pipes
- Playgrounds
- Freight elevators
- Tool handles
- Roofing
- Vehicle undercoating
- Curb ramps
- Parking lots
- The list is endless!
Coverage
|
1 Textured Roller 200 square feet |
Cove Mortar Kit
$159.99
Description
EC-1X is a three component 100% solids epoxy mortar designed for cove base surface applications. This product has specially selected aggregate and ingredients to provide easy construction of cove bases with the use of a marginal trowel or other cove base application tools. We include the Cover Mortar Primer with purchase of this product. We also sell the coving application tool we recommend for installation of this product.
Components
- Cover mortar liquid primer
- 100% solids epoxy mortar (A &B)
- Special aggregate
Instructional Video Below!
Key Features
Eco-Friendly
- 100% Solids.
Easy to use
- Simply mix all parts and apply with a coving trowel application tool
Versatile
- Can be used on virtually any substrate
Long Lasting
- Will not crack or fade over time
Seamless Finish
- When covered with our epoxy, a seamless floor to wall finish is created
Application Uses
- Garages
- Commercial kitchens
- Warehouses
- Breweries and wineries
- Repair shops
- Auto Body Shops
- Retail spaces
- Virtually any concrete surface!
Sizes and Coverage
- 1 lb per lineal foot of cove
- Kit size - 18 lbs
Colors
Decorative Colored Flakes
$89.99
Colored Flakes are colored chips/flakes designed for use in seamless, resinous flooring systems. Flakes are produced from pigments, resin, filler, and additives. Available in a wide array of colors and...
Heavy Duty Cove Tool
$59.00
Description
The curved hand trowel coving tool is designed for making 1/4" inch round coves on virtually any floor. This specially manufactured tool allows for you to make a smooth transition between the wall and the floor as needed. We recommend using this tool in bar backs, restaurants, cooking environment, or any other food processing type facility that requires such a cove to be present. This will help to avoid dirt, food, or any other waste being trapped on the surrounding floors edges. This product can be used with our Epoxy Mortar Resin Kit to make mortar or our Cove Mortar Kits.
We also carry cove strips. Please contact our office to find out more information.
Key Features
Heavy-Duty Handle
- Allows for easy use, comfort and stability
Versatile
- Can be used on virtually any smooth surface
Reusable
- Just wash and clean the tool to use time and time again
Application Uses
- Bars
- Restaurants
- Cooking Environments
- Food Processing Facilities
- Breweries
- Wineries
- Garages
Replacement 36" Application Head
$49.99
Description
The Replacement 36" Application Head is a special 36” wide resin head that makes application of the Spartacote Super Fast Drying Epoxy Coating seamless and easy. This is a replacement head for the Super Fast Drying Epoxy Application Broom. It features flexible 2.5” poly bristles that make application of the Spartacote Super Fast Drying Epoxy Coating smooth.
Product Information
-
36 " Super Fast Drying Epoxy Application Broom Head
Key Features
Setup
- Easy to use. Just attach to any standard paint stick.
Design
- 36" Wide head allows for maximum coverage
Flexibility
- Flexible 2.5” poly bristles
Reusable
- Simple wash down after each use to use over and over again
Made in USA
- This product is proudly made in the USA
Application Uses
- Garages
- Storage areas
- Work Stations
- Warehouses
- Breweries and wineries
- Repair shops
- Auto Body Shops
- Retail spaces
- Virtually any concrete surface!
Coverage
6" inch Floor Scraper Blade
$67.99
Description
This Commercial Grade Floor Scraper makes getting rid of old tiles, paints, epoxies, mastic, carpet strips, glue, and any other residual dirt and grit easy and pain free. Cut down your floor prep time with the strengthened 6 foot long handle and 6 inch wide tempered steel blade with padded grips. We also sell replacements blades if your blade becomes dull.
Key Features
Tempered Steel Blade
- 6" inch wide Steel Blade
Padded Handle
- 6' foot long padded handle allowing for comfort and stability
Replaceable Blades
- Easily swap out old or dull blades with news ones
Application Uses
Can remove:
- Tiles
- Paints
- Epoxies
- Mastic
- Carpet Strips
- Glue
- Residual dirt and grit
Notched Squeegee
$49.99
Description
The Notched Squeegee features an 18" inch wide frame that fits onto most standard paint sticks.
Comes in 1/8″, 3/16″, 1/4" serrations available (larger serrations=lower spread coverage rate). After applying with squeegee back roll with 1/4″ nap roller
Key Features
Frame
- 18" inch wide metal frame
Blade
- Notched Blade allows paints to be evenly spread
Design
- Reinforced socket allows for maximum strength attachment to paint sticks
Application Uses
- Can be used with a variety of our products
Sizes
| 1/8" Inch | 3/16" Inch | 1/4" inch |
Commercial Grade Floor Scraper
$67.99
Description
This Commercial Grade Floor Scraper makes getting rid of old tiles, paints, epoxies, mastic, carpet strips, glue, and any other residual dirt and grit easy and pain free. Cut down your floor prep time with the strengthened 6 foot long handle and 6 inch wide tempered steel blade with padded grips. We also sell replacements blades if you blade becomes dull.
Key Features
Tempered Steel Blade
- 6" inch wide Steel Blade
Padded Handle
- 6' foot long padded handle allowing for comfort and stability
Replaceable Blades
- Easily swap out old or dull blades with news ones
Application Uses
- Tiles
- Paints
- Epoxies
- Mastic
- Carpet Strips
- Glue
- Residual dirt and grit
Metal Power Mixer
$13.99 $17.99
This heavy duty metal power mixer attaches to any standard drill power drill to make mixing paint easy and pain free. This specially designed mixer allows paints to be throughly and completely giving you a consistent color and ensuring that all components are mixed thoroughly .
For larger joints, use foam ‘backer rod’ to support the joint filler.
Key Features
Design
- Specially designed to be sued for up to 5 Gal paint pails
Durability
- Extremely durable metal shaft
Size
- Fits 1/2 in. drills
Uses
- Can be used with a variety of paint products
Application Uses
- Can be used with any 5 Gal Pail
- Use for Epoxies, Novolacs, Urethane, Polyaspartics and more!