$229.99
The 100% Solids High Build Epoxy Coating is a single layer, no VOC epoxy resin coating. This 100% solids high build epoxy is a 2 part, 1 layer coating system. This product features no solvents or fillers and will cure at the thickness applied (between 10-15 mil thick). Big box store epoxies are usually 25-35% solids and dry at 2-3 mils thick. Coating will resist most common chemicals, car fluids and household cleaning products. It features and easy to clean surface using a mop or wet-vac.
You will receive a 2 to 1 ratio of “A” and “B”. You simply mix a “A” and “B” at 2:1. Please make sure to mix thoroughly and only mix as much as you need so as not to waste materials. Coverage will vary from depending on desired thickness and density of the floor (appx. 125 sq/ft per gallon). More porous and rough floors will require more coating yielding a lower coverage range. Aggregate/sand can be added as a filler to make patches and thicker versions. This product works great with any of our topcoat flooring options.
Choose from over 15 colors! Clear and custom color are available upon request. Bright colors such as red, yellow, HH white, and other lighter colors require greater pigmentation. Please inquire to find out pricing.
*Clear version is available special order with UV inhibitors to prevent yellowing. Please call or email to order. This product can also be used with the Residential I Military Grade Topcoat, Residential I Military Grade Topcoat Low VOC, and Residential I Standard Topcoat
1 ½ Gallons 175-250 sq.ft |
3 Gallons 350-500 sq.ft |
15 Gallons 1,750 - 2,500 sq.ft |
$67.99
This Commercial Grade Floor Scraper makes getting rid of old tiles, paints, epoxies, mastic, carpet strips, glue, and any other residual dirt and grit easy and pain free. Cut down your floor prep time with the strengthened 6 foot long handle and 6 inch wide tempered steel blade with padded grips. We also sell replacements blades if your blade becomes dull.
Can remove:
$214.99
The 93% Solids Medium Build Epoxy Coating is a single layer self priming epoxy resin coating. This 93% solids medium build epoxy is a 2 part 1 layer coating system. This product features no solvents or fillers and will cure at the thickness applied (between 6-12 mils thick). Big box store epoxies are usually 25-35% solids and dry at 2-3 mils thick.Coating will resist most common chemicals, car fluids and household cleaning products. It features and easy to clean surface using a mop or wet-vac.
You will receive a 2 to 1 ratio of “A” and “B”. You simply mix a “A” and “B” at 2:1. Please make sure to mix thoroughly and only mix as much as you need so as not to waste materials. Coverage will vary depending on desired thickness and density of the floor (125-250 sq/ft per gallon). More porous and rough floors will require more coating yielding a lower coverage range. This product works great with most other Epoxy Central products. Please refer to product data sheets.
Choose from over 15 colors! Clear and custom color are available upon request.
*Clear version is available special order with UV inhibitors to prevent yellowing. Please call or email to order. This product can also be used with the Residential I Military Grade Topcoat, Residential I Military Grade Topcoat Low VOC, and Residential I Standard Topcoat
1 ½ Gallons 260 - 375 sq.ft |
3 Gallons 520 - 750 sq.ft |
15 Gallons 2,600 - 3,750 sq.ft |
$49.99
Acid-Safe etching kit is an environmentally safe alternative to using muriatic acid etch which can cause skin irritation and adverse reactions in certain people. This amazing new product has all the cleaning power of powerful acids but with 90% less fumes and odors. If EC Acid Etch comes in contact with your skin it will not cause burns. This product works great for preparing concrete floors before installing epoxy coatings without the mess of diamond grinding or shot blasting. It can also be used as safe alternative cleaner for tile.
This Kit includes 2 lbs of high performance TSP powder, 1 gallon of eco-friendly concentrated etching solution (dilute 2-5 parts water to 1 gal of EC Acid Etch). We also include a brush and gloves (for extra protection!). Coverage will vary but approximate usage levels range from 300-600 sq/ft per Kit.
Note: If concrete floors have had previous floor coatings installed please contact us for best recommendation of prepping method as acid etching might not suffice.
2 Gal
300-600 sq.ft
|
$10.00
The aluminum oxide non skid additive (grit) is a powdered metal, super hard, non skid high wear additive is added to your coating to give it a super resistant non...
$309.00
The Chemical Resistant Epoxy Novolac Topcoat is a one layer 96% solids, acid and chemical resistant novolac coating topcoat sealer. Ideal for usage in hostile environments where chemical/acid resistance is of the utmost importance such as chemical factories, storage tanks, processing plants, battery storage rooms, chrome plating facilities, breweries, wineries and other similar applications.
This 1 layer coating is specifically designed for application where splash/spill of acids, chemicals, and solvents occur frequently. It can also withstand normal wear and tear, impact falls, PH cleaners, fluids, any other substance that might get onto your floor. It is super easy to clean, just use a mop or wet vac and have you floor looking like new in no time.
Custom color are available upon request. Bright colors such as red, yellow, white, and other lighter colors require greater pigmentation. Please inquire to find out pricing.
If you would like to add more texture to your floor coating please make sure to buy Ultra-wear nonskid additive that gets mixed into this topcoat. Simply pour 1 can per gallon and mix throughly into your topcoat mixture. Make sure to mix every couple of minutes as the non-skid will fall to the bottom of the mixture. Clear is available in 1 Gal quantity. coverage is appx. 100 sq.ft per/Gal.
*Colors or gloss may be affected by high/low temperature, extreme lighting exposure. Clear version is available special order with UV inhibitors to prevent yellowing. Please call or email to order.
1 ½ Gallons 125-175 sq.ft |
3 Gallons 250-350 sq.ft |
15 Gallons 1,250 - 1,750 sq.ft |
$1.99
The Commando Coat 100X - 2 Layer Epoxy Coating Kit is a two layer two part epoxy coating kit. Simply enter your desired square footage amount and the price will automatically be calculated.
This system features a single layer of epoxy/primer followed by a protective urethane topcoat. This build up of two coatings strengthens the epoxy bond allowing for your floor to resist acids/chemicals, abrasions, hot/cold temperatures, dirt and grim from foot traffic, fluid spills and anything else you might get on your floor! It features and easy to clean surface using a mop or wet-vac. This coating is ideal for warehouses studios, basements, storage areas, retail showrooms and any other residential flooring that is concrete based.
Note: Please note that VOC laws have recently changed. If you are located in one of these states we will manually fill your order with the Low VOC version which is VOC compliant by EPA standards and adjust the price accordingly when processed. CA, CT, DE, IL, IN, MD, MA, ME, NJ, NY, OH, PA, RI, VA, KY and all of Canada.
Choose from over 15 colors for you floor! All colored coatings comes with pigments packs which you add when you are mixing.
OPTIONAL:
Please type what color flecks you would like to add to your floor coating in the comments section. We include 3 lbs per 2 Gal Kit. You will throw the flecks onto your floor after you lay down the initial epoxy coating and then seal the floor with the clear topcoat.
By the Square Foot. 500 sq.ft Minimum
*Please note depending on how thick or thin you apply the coating coverage will vary. If your floor is more porous it will require more epoxy. If you are applying on new, smooth concrete then you will use less epoxy.
$3.19
The Commando Coat 200X - 3 Layer Epoxy Flooring Kit is a commercial grade three layer high performance coating system. This kit features a single layer of epoxy primer, single layer of epoxy coating, and standard topcoat along with our decorative flooring chips. This 3 layer floor system is ideal for commercial or home use where the floor is subject to daily use and activity. The 3 layer build up provides you with the a super durable floor that can withstand high impact falls, chemicals, cleaners, car fluids, any other substance that might get onto your floor. It features and easy to clean surface using a mop or wet-vac. This coating is ideal for garages, repair shops, warehouses, and any other flooring that is concrete based. The decorative chips (optional) will hide imperfections and give you floor that wow factor!
You will receive :
We give you everything you need to properly install your epoxy coating.
Choose from over 15 colors for you floor and over 40 solid colors of decorative flecks! Clear and custom epoxy colors are available upon request. Bright colors such as red, yellow, white, and other lighter colors require greater pigmentation. Please inquire to find out pricing.
Please note that VOC laws have recently changed. If you are located in one of these states we will substitute the Standard Topcoat for the Low VOC version which is VOC compliant by EPA standards. Affected States are: CA, CT, DE, IL, IN, MD, MA, ME, NJ, NY, OH, PA, RI, VA, KY and all of Canada.
Please type what color flecks you would like to add to your floor coating in the comments section. We include 5 lbs per 500 sq/ft. You will throw the flecks onto your floor after you lay down the initial epoxy coating and then seal the floor with the clear topcoat. See the Decorative Flecks Page to view all colors.
By the Square Foot. 500 sq.ft Minimum
*Please note depending on how thick or thin you apply the coating coverage will vary. If your floor is more porous it will require more epoxy. If you are applying on new, smooth concrete then you will use less epoxy.
$2.99
The Commando Coat 300X - Chemical and Acid Resistant Epoxy Novolac Coating Kit is a two layer acid and chemical resistant novolac coating system. Simply enter your desired square footage amount and the price will automatically be calculated.
This system features a single layer of enhanced epoxy novolac primer followed by a single layer of novolac topcoat. This 2 layer floor coating system is ideal for use in hostile environments where chemical/acid resistance is of the utmost importance. We suggest using this on chemical factories, breweries, wineries, distilleries, processing plants, battery storage rooms, chrome plating facilities, and other similar applications.
This 2 layer coating is specifically designed for application where splash/spill of acids, chemicals, and solvents occur frequently. The 2 layer build up strengthens your floor by allowing the primer ”grip” to the concrete and then letting the topcoat bond to the primer resulting in a super strong build of highly effective floor coatings. This floor can also withstand normal wear and tear, impact falls, PH cleaners, fluids, any other substance that might get onto your floor. It is super easy to clean, just use a mop or wet vac and have you floor looking like new in no time.
You will receive:
Choose from over 3 colors for you floor! Clear and custom color are available upon request. Bright colors such as red, yellow, white, and other lighter colors require greater pigmentation. Please inquire to find out pricing.
*Colors or gloss may be affected by high/low temperature, extreme lighting exposure. Clear version is available special order with UV inhibitors to prevent yellowing. Please call or email to order.
$6.99
The Commando Coat 400X - Super Thick Slurry Coating Kit is an aggregate-enhanced, 4-component urethane slurry epoxy. Simply enter your desired square footage amount and the price will automatically be calculated.
This coating can withstand extremely high/low temperatures and is thermal shock proof providing a great coating for hot wash down areas. This is our thickest and most durable coating system! It features self-leveling capabilities and is formulated for older/corroded floors where there are high levels of pitting and smoothing out the floor is a main focus.
This thick aggregate-enhanced coating is used by commercial food packagers and some of the country’s largest breweries, wineries, and distilleries. It is highly resistant to damage due to it’s 8,400 psi compressive strength (about twice the strength of concrete!). This product is one of the best long term flooring solutions on the market.
Kit Components:
Instructions:
Notes:
Only available in 3 colors. Tile Red, Medium Gray, and Tan
Priced by the sq.ft |
*Please note depending on how thick or thin you apply the coating coverage will vary. If your floor is more porous it will require more epoxy. If you are applying on new, smooth concrete then you will use less epoxy.
$2.29
Commando Coat 500X - High Performance Flexible Urethane Coating, single-pack, totally flexible, slip-resistant, waterproof protective polyurethane coating with self-contained recycled rubber granules for an attractive tough textured finish. Simply enter your desired square footage amount and the price will automatically be calculated.
When exposed to atmospheric moisture, Commando Coat 500X undergoes a chemical curing process which changes it from a liquid to a tough polyurethane membrane. It has excellent abrasion and chemical resistance. It is easy to apply, simply just roll it out! Ideal for boat decks, balconies, patios, houseboats, salt water exposure, docks, sidewalks, and thousands of other uses.
Commando Coat 500X is available in 4 versions: Indoor Smooth @ $2.29/sq ft, Indoor Textured @ $3.29/sq ft, Outdoor Smooth @ $2.99/ft, and Outdoor Textured @ 3.99/sq ft. *Clear color is not available in indoor version, only outdoor. Textured includes 1 coat of smooth, 1 coat of textured.
Minimum order is 150 square feet.
If ordering Textured version, please order 1 textured roller per 200 square feet.
Please note that colors of textured Commando Coat 500X are greatly affected by the addition of granules (which make it textured rather than smooth). We strongly advise you to order samples if color is an important factor.
Smooth |
Indoor |
*By the Square Foot. 150 sq.ft Minimum. Please note depending on how thick or thin you apply the coating coverage will vary.
$1,499.00
The Commando Coat 600X - 100% Solids Metallic Epoxy Kit is a 3 layer metallic epoxy coating kit. This DIY kit includes material and appliances for a 600 sq.ft space (equivalent of a standard 2-car garage).
Create endless patterns and designs with metallic powders to make your floor the highlight of your home.
Coverage results vary with surface porosity, floor texture, application methods and technique. Heavier applications and rougher surfaces will yield less coverage.
What do you get with the kit?
Coverage results vary with surface porosity, floor texture, application methods and technique. Heavier applications and rougher surfaces will yield less coverage.
Priming with contrasting colors (normally black) primer is required.
Instructions:
Notes:
Available in a variety of metallic colors. This system can be used with any metallic powder on the market if you can not find a color choice of your liking
600 sq.ft Kit Covers standard 2 car gargae. |
*Please note depending on how thick or thin you apply the coating coverage will vary. If your floor is more porous it will require more epoxy. If you are applying on new, smooth concrete then you will use less epoxy.
Sign up to get the latest on sales, new releases and more …
© 2023 Epoxy Central. All rights reserved Powered by Shopify