Eco-friendly Garage Floor Epoxy Primers
One of the most durable finishes that you can apply to a garage floor today is an epoxy coating. Not only does it protect your garage floor, it can instantly transform your ugly cement into a professional looking garage floor of function and excellence.
Primers often go overlooked when applying an epoxy floor. Our wear-resistant and high-performance Garage Floor Epoxy Primer provides numerous benefits for your garage floor coating.
An epoxy floor primer is the foundation of your floor coating solution. Epoxy primers act as the layer that you will build upon with other base coats and top coats. Our epoxy primers are superior and provide better adhesion because they penetrate into the concrete substrate for an effective bond. Contact us to know more about super durable Garage Floor Epoxy Primers.
How Garage Floor Epoxy Primers Work?
Epoxy primers adhere to concrete by forming a chemical bond. When you mix your epoxy primer what you are actually doing is creating a chemical reaction that initiates the process of solidifying.$229.99
The 100% Solids High Build Epoxy Coating is a single layer, no VOC epoxy resin coating. This 100% solids high build epoxy is a 2 part, 1 layer coating system. This product features no solvents or fillers and will cure at the thickness applied (between 10-15 mil thick). Big box store epoxies are usually 25-35% solids and dry at 2-3 mils thick. Coating will resist most common chemicals, car fluids and household cleaning products. It features and easy to clean surface using a mop or wet-vac.
You will receive a 2 to 1 ratio of “A” and “B”. You simply mix a “A” and “B” at 2:1. Please make sure to mix thoroughly and only mix as much as you need so as not to waste materials. Coverage will vary from depending on desired thickness and density of the floor (appx. 125 sq/ft per gallon). More porous and rough floors will require more coating yielding a lower coverage range. Aggregate/sand can be added as a filler to make patches and thicker versions. This product works great with any of our topcoat flooring options.
Choose from over 15 colors! Clear and custom color are available upon request. Bright colors such as red, yellow, HH white, and other lighter colors require greater pigmentation. Please inquire to find out pricing.
*Clear version is available special order with UV inhibitors to prevent yellowing. Please call or email to order. This product can also be used with the Residential I Military Grade Topcoat, Residential I Military Grade Topcoat Low VOC, and Residential I Standard Topcoat
1 ½ Gallons 175-250 sq.ft |
3 Gallons 350-500 sq.ft |
15 Gallons 1,750 - 2,500 sq.ft |
$259.99
The Self Priming Chemical Resistant Epoxy Novolac Coating is a one layer 85% solids acid and chemical resistant novolac coating primer. This coating is single layer of enhanced epoxy novolac that offers great substrate penetration and low odor. Ideal usage as a primer for use in hostile environments where chemical/acid resistance is of the utmost importance such as chemical factories, processing plants, battery storage rooms, chrome plating facilities, and other similar applications.
This 1 layer coating is specifically designed for application where splash/spill of acids, chemicals, and solvents occur frequently. It can also withstand normal wear and tear, impact falls, PH cleaners, fluids, any other substance that might get onto your floor. It is super easy to clean, just use a mop or wet vac and have you floor looking like new in no time.
We suggest using this with the as the primer/base coat with the Chemical Resistant Epoxy Novolac Topcoat.
Clear and custom color are available upon request. Bright colors such as red, yellow, HH white, and other lighter colors require greater pigmentation. Please inquire to find out pricing.
*Colors or gloss may be affected by high/low temperature, extreme lighting exposure. Clear version is available special order with UV inhibitors to prevent yellowing. Please call or email to order.
1 ½ Gallons 250-275 sq.ft |
3 Gallons 500-550 sq.ft |
15 Gallons 2,475 - 2,625 sq.ft |
$214.99
The 93% Solids Medium Build Epoxy Coating is a single layer self priming epoxy resin coating. This 93% solids medium build epoxy is a 2 part 1 layer coating system. This product features no solvents or fillers and will cure at the thickness applied (between 6-12 mils thick). Big box store epoxies are usually 25-35% solids and dry at 2-3 mils thick.Coating will resist most common chemicals, car fluids and household cleaning products. It features and easy to clean surface using a mop or wet-vac.
You will receive a 2 to 1 ratio of “A” and “B”. You simply mix a “A” and “B” at 2:1. Please make sure to mix thoroughly and only mix as much as you need so as not to waste materials. Coverage will vary depending on desired thickness and density of the floor (125-250 sq/ft per gallon). More porous and rough floors will require more coating yielding a lower coverage range. This product works great with most other Epoxy Central products. Please refer to product data sheets.
Choose from over 15 colors! Clear and custom color are available upon request.
*Clear version is available special order with UV inhibitors to prevent yellowing. Please call or email to order. This product can also be used with the Residential I Military Grade Topcoat, Residential I Military Grade Topcoat Low VOC, and Residential I Standard Topcoat
1 ½ Gallons 260 - 375 sq.ft |
3 Gallons 520 - 750 sq.ft |
15 Gallons 2,600 - 3,750 sq.ft |
$339.00
Product Description
The Single Layer Epoxy Primer is a single layer solvent based epoxy primer. This product has superb chemical, abrasion, and substrate resistance allowing it to withstand most common cleaning chemicals, solvents, fluids and other debris that will get on your floor. It features and easy to clean surface using a mop or wet-vac.
This product comes pre-packaged by weight. All kits should be mixed in their entirety at a 1:1 ratio. You will be able to coat appx 250 sq/ft per gallon at 6 Mils thickness.
We suggest using this primer if you are looking for a multiple layer coated floor as this allows for the additional coat of epoxy to grip to the primer providing stronger bond.
Warning: This product does have an odor so we suggest that other members of the facility you are installing this product in clear the area.
2 Gallons 250-300 sq.ft |
10 Gallons 1,250-1,500 sq.ft |
$125.00
The Single Layer Epoxy Primer Low VOC is a single layer water based epoxy primer. This product has superb chemical, abrasion, and substrate resistance allowing it to withstand most common chemicals, solvents, car fluids and household cleaning products. It features and easy to clean surface using a mop or wet-vac.
This product comes pre-packaged by weight. All kits should be mixed in their entirety at a 4:1 ratio. You will be able to coat appx 250 sq/ft per gallon at 6 Mils thickness.
NOTE: The clear is not water clear and is not suitable for topcoating over previously color coated floors. The clear is suitable as a primer or concrete sealer only.
This product can be used as a primer to build up your floors resistance and maintain the floors longevity. We suggest using this primer if you are looking for a multiple layer coated floor as this allows for the additional coat of epoxy to grip to the primer providing stronger bond. This product can be used in conjuction with most of Epoxy Central products. Please refer product data sheets or contact us with questions.
1 Gallons 250-300 sq.ft |
2 Gallons 500-600 sq.ft |
5 Gallons 1,250-1,500 sq.ft |
$119.00
The Oil Stop Primer is designed for floors where oils spills, grease, petroleum, and other alike chemicals or substances have penetrated deep into the concrete contaminating it. This unique 2 part primer allows epoxy coatings to bond the floor preventing beading on stained surfaces. This product works great with any our epoxy paint coatings but better than that this product will virtually work with any epoxy product on the market.
1/2 Gal 100-125 sq.ft |
2 Gal 400-500 sq.ft |
$49.99
The Flash Bond Primer is a specialized one part liquid primer. Used as a pre-treatment for bonding of virtually any coating (epoxies, urethanes, mortar, novolacs). If you have a porous floor or are unaware of the coating that currently exists then this product will work great as a primer for a featured coating. It bonds to metal, wood, tile, fiberglass, linoleum, vinyl, ceramic, glass, composite decking, and virtually any surface. It will dry as off-white and requires no special skills to install. Just roll or bush onto your surface. Flash Bond Primer is also used as a primer for ArmorTop Outdoor Coating for bare concrete or asphalt.
Note: When applying on painted surfaces, plastic, or vinyl siding please ensure to test a small area prior, to assure that the underlying surface will not be affected. We do not recommend this product for use in hot tubs, showers, and baths. Please do not apply in areas where there is continuous or hot water present. Please make sure to wipe down with your floor with denatured alcohol (after you buff) before application.
1 Gal
200-400 sq.ft
|
*Coverage will be affected by type of surface. It will cover less on porous or irregular surfaces such as asphalt.
$89.99
The Pro Renew Wood/Concrete Primer is single coat, super thick wood surface primer. The primer is manufactured to provide a strengthened bond to your wooden deck, patio, walkway or any wood outdoor surface. Simply mix in a can and roll on like regular paint. Let the paint dry to the touch and then apply the Pro Renew Wood/Concrete Resurfacer. This product also comes in a smooth version that has less grit and friction. Please contact us directly if you are interested.
Please Note: We highly suggest using this product as a primer to the Pro Renew Wood/Concrete Resurfacer. You do not need to use this primer on concrete surfaces.
*Primer is required on wood surfaces for lifetime warranty.
1 Gal
400-450 square feet per gallon
Applied with standard 3/8″ nap roller. |
5 Gal
2,000-2,250 square feet per gallon
Applied with standard 3/8″ nap roller. |
$199.00
Pro Renew Wood and Concrete Resurfacer is a specially formulated eco-friendly textured liquid coating that can be applied to and wood or concrete surface to bring it back to life and avoid expensive replacement. This scientifically engineered formula is not a paint or stain, but a 1-part (no mixing) water based thick coating that is designed to be applied to wood or concrete surfaces that show imperfections and surface damage from weather conditions, sunlight exposure, moisture, cracks, mold, and discoloration. Pro Renew acts as a liquid resurfacing coating that ’sits’ on the surface but adheres tenaciously (unlike stains or paints that soak in, and epoxies that are not UV stable) and provides a brand new slip-resistant surface. Gives the effect of replacing at a fraction of the cost.
Available in 2 Gallon Kits. Lighter colors and older/more porous wood can yield less coverage. ‘Smooth’ high solids acrylic version is available for painting wood uprights, stairs and between boards. This product is available in 25 colors!
Please Note: This product is not recommended for areas that have standing water or where water does not drain properly. Contact our office for coatings for these types of areas. Pail contents 3.75 gals if not tinted, 4 gals with tint. Pro Renew Wood/Concrete Resurfacer is made in batches and color tints will vary slightly from batch to batch. Please make sure to order enough material for your entire job to avoid discoloration in future applications. If this color shift does occur, it can be corrected by putting on a coat of the Smooth Version).Pail contents 3.75 gals if not tinted, 4 gals with tint.
*2 coats are required for proper performance and warranty coverage. Please note that it is mandatory to use our special textured foam roller pad to apply for the warranty coverage.
Pro Renew Wood Primer is required for all applications to wood in order to obtain the lifetime warranty. Please use our Use our Pro Flash Bond Primer for composite (Trex type) decking.
2 Gal 50-100 sq.ft per gallon |
*Lighter colors and older/more porous wood can yield less coverage
$123.99
This two component water based colored epoxy coating is designed for applications to vertical surfaces at a high build while resisting sags or slumps. We recommend this product for use on cement or concrete block applications. If your substrate is extremely porous or degrading we recommend also using a primer before applying this product.
*Porous surfaces will soak up more paint.
Note: Standard lead times are 7-10 business days plus transit time.
Price is per Gallon
1 Gal
120 sq.ft @ 15 mils
|
$254.99
Product Description
The Fast Set Water Based LOW VOC Epoxy Primer is a two component water based epoxy coating that exhibits excellent characteristics that rival solvent based products. This product has a tack free time of about 3 hours and can support traffic in as little as 6-12 hours.
It has good chemical resistance, abrasion resistance, and substrate penetration to withstand most common cleaning chemicals, solvents, fluids and other debris that will get on your floor. It features and easy to clean surface using a mop or wet-vac. Color is only available in CLEAR and the clear is not suitable as a topcoat for colored epoxies. Only suitable as a topcoat as a concrete sealer
This product comes pre-packaged by weight. Kits should be mixed in their entirety. If partial kits are to be used, refer to the product TDS and instructions for proper mix ratios. You will be able to coat appx 250 sq/ft per gallon at 6 Mils thickness. This primer attached meets the low voc specifications required in states such as CA.
We suggest using this primer if you are looking for a multiple layer coated floor as this allows for additional coats of epoxy to grip to this primer providing a stronger bond.
2 Gallons 230-320 sq.ft @ 5-7 mil thickness |
5 Gallons 575-800 @ 5-7 mil thickness |
$349.00
Product Description
The Moisture Vapor Barrier two component 100% solids epoxy seal coat that can help control moisture vapor emission rates up to 20 lb/24hr/1000 ft prior to application of Vinyl sheets, Tiles, Cementitious overlays, Terrazo, Wood veneers, Carpet or polymeric coating systems.
This product meets the ASTM F3010 product requirements for vapor presence at the recommended thickness.
Color is only available in CLEAR . This product comes pre-packaged by weight. Kits should be mixed in their entirety. If partial kits are to be used, refer to the product TDS and instructions for proper mix ratios.
1.5 Gallons 150 sq.ft @ 15 mil thickness |
3 Gallons 300 sq.ft @ 15 mil thickness |
$349.00
The EC8000X is a low VOC water based epoxy primer and stain blocker. This low VOC product is easy to apply, maintain, and clean on virtually any indoor or outdoor substrate. This product is UV resistant and does not yellow. Decorative flakes can be added to this coating to help hid floor imperfections and give your floor that WOW factor. This product is sold in 2.5 Gal sets for the colored version 1 Gallon sets for the clear. Coverage is appx 300 sq.ft per gal for both colored and clear.
1-2 coats of clear will give the floor a ‘polished concrete’ look at an economical price.
VOC is less than 50g/l, meeting the most stringent California environmental laws in all CA counties.
Fast drying (2-3 hours per coat and can be open to foot traffic in just hours).
EC8000X s a 2-part product and comes in pre-measured containers for easy mixing by simply pouring the Part B into the Part A container, and then mix well. Thickness 3-5 mils. Long working time of approximately 1 hour in normal temperatures. Coverage will vary depending on desired thickness and density of the floor. More porous and rough floors will require more coating yielding a lower coverage.
Please note that the clear has a slight amber cast to it so to avoid any minor ambering of surface apply the clear coat thinly.
If you are looking to add decorative flakes then application will be:
Choose from Gray, Beige, and Clear (Satin Finish) versions.
This product is not suitable for wood substrates. Please refer to our other products that can be used on wood substrates.
Colored 2.5 Gal Set appx. 750 sq.ft |
Clear 1 Gal Set appx. 300 sq.ft |
$119.00
The PP100 - 1 Part Pool Paint is a no mix low VOC heavy duty pool paint. This product is super easy to use. Just open, pour and apply!
This coating is effective on both new and old pools, can be applied over existing chlorinated rubber pool paints, in addition to bare plaster and concrete surfaces. If you’ve just installed a new pool, or are simply repairing your old pool, the PP100 coating will help you complete your project faster as it does not require much time to dry. This coating is designed to last and will leave the internal surfaces of your pool stronger than ever and able to resist fading, chemicals, and abrasions over time.
Coverage is 300 square feet/gallon per coat (two coats required). Can be used on most coated surfaces except epoxy pool paint and Jacuzzis/spas, concrete or fiberglass. Please see the PP200 - 2 Part Pool Paint for these applications surfaces.
Available in White, Dawn Blue and Black. 1 Gal size only. Can be used with our Skid Tex non skid additive on areas such as steps and areas where slippage could be of concern. Two coats required!
One year warranty.
*PLEASE NOTE ORDERS ON THIS PRODUCT SHIP WITHIN 10-14 BUSINESS DAYS OF PURCHASE. IF YOU ARE SETTING A TIMELINE FOR YOUR PROJECT PLEASE TAKE SHIPPING TIMES INTO CONSIDERATION.