Crack Repair Epoxy Putty
$119.00
Description
The Crack Repair Putty is a two component 100% solids epoxy crack filler that you mix together to fill all types of cracks, dinges, joints expansions, and hairline fractures in your floor. It goes on like ‘spackle’ but is 5X stronger than concrete, and has 4X the bonding power to concrete vs. mortar type crack repairs. It can fill cracks up to 3/16″ deep and several inches wide without the use of aggregates.
To apply simply scoop out equal parts of “A” and “B” (mix ratio of 1:1) and mix on a piece of cardboard until evenly mixed. Then apply with putty knife or trowel just like you would with a painters spackle. It can be coated over IMMEDIATELY, even if the floor is not fully cured yet!
Coverage is 500 lineal feet of 1/8″ x 1/8″ size cracks for the qt size kit and 2,000 lineal feet for the 2 gal kit. You will get less coverage for larger cracks. This product is only available in gray. You can paint epoxy right over it!
Note: This product can also be used on vertical walls.
Product Information
- Two Component 100% solids epoxy crack Filler
Key Features
Eco-Friendly
- 100% Solids. Has less than 11 g/l VOC
Easy to use
- Goes on like spackle. Just mix and apply
Versatile
- Can be used on virtually any horizontal or vertical surface
High Performing
- 8,710 psi Compressive Strength
Strong
- 5x as strong as concrete
Long Lasting
- Will not crack or fade over time
Seamless Finish
- When covered with our epoxy, cracks and joints will blend into the floor
Application Uses
- Garages
- Storage areas
- Work Stations
- Warehouses
- Breweries and wineries
- Repair shops
- Auto Body Shops
- Retail spaces
- Virtually any concrete surface!
Sizes and Coverage
|
Quart
500 Lineal Feet |
2 Gal |
Colors
Related Items
Oil Stop Primer
$119.00
Description
The Oil Stop Primer is designed for floors where oils spills, grease, petroleum, and other alike chemicals or substances have penetrated deep into the concrete contaminating it. This unique 2 part primer allows epoxy coatings to bond the floor preventing beading on stained surfaces. This product works great with any our epoxy paint coatings but better than that this product will virtually work with any epoxy product on the market.
Key Features
High Performance
- Super resistant against chemicals, car fluids, and cleaning products
Eco-Friendly
- 70% Solids
Thickness
- Dries up to 7 mils thick
Strength
- Super durable when used with our epoxy products. Allows for any even stronger bond between the floor and epoxy
Hot Tire Pickup
- Extremely reliable against hot tire pickup
Easy to Clean
- Just use soap and water to clean time and time again
Versatile
- Can be used with most epoxy products
Life Span
- Our floors virtually never fail. Our Standard floor warranty is included on all flooring products
Application Uses
- Residential
- Commercial
- Food and beverage Facilities
- Basements
- Equipment Rooms
- Virtually any concrete surface!
Coverage
|
1/2 Gal 100-125 sq.ft |
2 Gal 400-500 sq.ft |
Colors
Epoxy Trak Textured Roller
$14.99
Description
The Epoxy Trak Textured Roller is required for use with the Commando Coat 500X - High Performance Flexible Urethane Coating. This special roller allows the coating to be evenly distributed due to the textured granules. It also helps prevent uneven applications.
Coverage is 200 sq.ft per roller. This product comes in 4 inch and 9 inch versions.
Product Information
-
Highly Durable Textured Roller
Key Features
Design
- Roller is specifically designed to be used with The Commando Coat 500X Coating Kit (standard paint rollers will not distribute paint evenly and disintegrate quickly as the coating is heaving)
Durability
- Extremely durable. The Plastic core allows you to cut down the roller to custom size
Application
- Makes application of the The Super-Duty Epoxy Trak easy
Life Span
- Each roller will be good for one use. Simply throw away when finished
Application Uses
- Warehouses
- Commercial
- Military hangers
- Pedestrian walkways
- Truck beds
- Ramps
- Loading docks
- Bridges
- Metal and Wooden Steps
- Catwalks
- Ship Decks
- Marine applications
- Boats
- Storage tanks
- Handicap ramps
- Pools and spas
- Sealing rusty pipes
- Playgrounds
- Freight elevators
- Tool handles
- Roofing
- Vehicle undercoating
- Curb ramps
- Parking lots
- The list is endless!
Coverage
|
1 Textured Roller 200 square feet |
Flash Bond Primer
$49.99
Description
The Flash Bond Primer is a specialized one part liquid primer. Used as a pre-treatment for bonding of virtually any coating (epoxies, urethanes, mortar, novolacs). If you have a porous floor or are unaware of the coating that currently exists then this product will work great as a primer for a featured coating. It bonds to metal, wood, tile, fiberglass, linoleum, vinyl, ceramic, glass, composite decking, and virtually any surface. It will dry as off-white and requires no special skills to install. Just roll or bush onto your surface. Flash Bond Primer is also used as a primer for ArmorTop Outdoor Coating for bare concrete or asphalt.
Note: When applying on painted surfaces, plastic, or vinyl siding please ensure to test a small area prior, to assure that the underlying surface will not be affected. We do not recommend this product for use in hot tubs, showers, and baths. Please do not apply in areas where there is continuous or hot water present. Please make sure to wipe down with your floor with denatured alcohol (after you buff) before application.
Product Information
- Single Layer One Part Specialized Primer
Key Features
One-Part
- No mixing of components as this is a one part product
Adhesion
- Dries to virtually any surface (metal, wood, tile, fiberglass, linoleum, vinyl, etc.)
Finish
- Improved wet adhesion on hard, glossy surfaces
Temperature
- Low temperature / high humidity application
Leveling
- Excellent leveling ability
Odor
- Low odor & compatible with all top coat paints
Uses
- Can be used indoors or outdoors
Installation
- Requires no special skills to apply
Application Uses
- Metal
- Vinyls
- Wood
- Tile
- Fiberglass
- Linoleum
- Ceramic
- Glass
- Composite Decking
Coverage
|
1 Gal
200-400 sq.ft
|
*Coverage will be affected by type of surface. It will cover less on porous or irregular surfaces such as asphalt.
Colors
Spartacote 72% Solids Super Fast Drying Polyaspartic Coating - Tintable Gloss
$499.00
Product Description
The 72% Solids Super Fast Drying Polyaspartic Coating - made by Spartacote is a 2 layer acid and chemical resistant polyaspartic coating system that dries within 1-2 hours of application. It is extremely durable against acids/chemicals, abrasions, hot/cold temperatures, oils, and fluids. It applies easily and requires no special skills to install. Can be used outdoors as it does not yellow like epoxies. Gloss finish only (can be top-coated with the Flex SB Low Gloss for low gloss requirements. Please email directly to inquire). Working time 15-20 minutes under standard 70 degree conditions.
This product features a 2 step process. First apply the polyaspartic coating with flecks (optional). Wait 2-3 hours for the coat to dry and then apply a second coat. This coating is best used where time is of the essence. Working time after mixing each batch is appx 20 minutes depending on temperature. The Super-Fast Drying Industrial Polyaspartic comes standard in 'clear' and is field tinted with our pigment packs. Colored Flecks can be added to this system but if you order this we will automatically fill the order will clear gloss topcoat.
Product Information:
- 2-part polyaspartic coating (Mix ratio: 1 Part A:1 Part B). Colored with Tintable Pigment Pack
- 2-part polyaspartic coating (Mix ratio: 1 Part A:1 Part B). Clear Gloss
- Colored Pigment Pack
Choose from over 15 colors for you floor! Custom color are available upon request. Bright colors such as red, yellow, white, and other lighter colors require greater pigmentation. Please inquire to find out pricing.
Please type what color flecks you would like to add to your floor coating in the comments section. We include 3 lbs per 2 Gal Kit. You will throw the flecks onto your floor after you lay down the initial epoxy coating and then seal the floor with the clear gloss topcoat.
IF YOU DO NOT PROVIDE A FLECK COLOR WE WILL NOT SEND ANY FLECKS.
Please ensure to order proper amount per square footage needed for 2X coats. Ie. If you are covering a 500 sq.ft garage you will need 4 gallons of product.
Fore 100% solids version of this product please email us at info@epoxycentral.com for pricing.
Key Features
High Performance
- Superior top-coat chemical & stain resistance. gloss finish
Eco-Friendly
- Low Odor. Complies with all current EPA standards
Thickness
- Dries up to 8-10 mils thick
Long Lasting
- Our floors virtually never fail. Our Standard floor warranty is included on all flooring products
Weather
- Cold-Weather Cure (-30ºF)
Resistance
- Excellent Impact & Abrasion resistance
UV
- UV Resistant
Anti Slip Surface
- Micro-media agents may be added for increased traction
Easy to Clean
- Just use soap and water to clean time and time again
Colors
- Available in a Clear Gloss and Low-Gloss (satin) finish as well as 15 colors
Installation
- 1 Day Installation can be done with this product! Requires no special skills to apply
Application Uses
- Residential Garages
- Basements
- Outdoor Surfaces
- Freight Entrances
- Laundry Rooms
- Retail Showrooms
- Building Storage Areas
- Auto Shops
- Day Care Centers
- Docking Stations
- Boiler rooms
- Building Entry/Exit Pathways
- Virtually Any Concrete Surface!
Coverage
|
2 Gal Set 500 sq.ft |
4 Gal Set 1000 sq/ft |
10 Gal Set 2500 sq/ft |
*Please note depending on how thick or thin you apply the coating coverage will vary. If your floor is more porous it will require more epoxy. If you are applying on new, smooth concrete then you will use less epoxy. Appx covergae is 250 sq.ft per Gal
Colors
