The Commando Coat 300X - Chemical and Acid Resistant Epoxy Novolac Coating Kit is a two layer acid and chemical resistant novolac coating system. Simply enter your desired square footage amount and the price will automatically be calculated.
This system features a single layer of enhanced epoxy novolac primer followed by a single layer of novolac topcoat. This 2 layer floor coating system is ideal for use in hostile environments where chemical/acid resistance is of the utmost importance. We suggest using this on chemical factories, breweries, wineries, distilleries, processing plants, battery storage rooms, chrome plating facilities, and other similar applications.
This 2 layer coating is specifically designed for application where splash/spill of acids, chemicals, and solvents occur frequently. The 2 layer build up strengthens your floor by allowing the primer ”grip” to the concrete and then letting the topcoat bond to the primer resulting in a super strong build of highly effective floor coatings. This floor can also withstand normal wear and tear, impact falls, PH cleaners, fluids, any other substance that might get onto your floor. It is super easy to clean, just use a mop or wet vac and have you floor looking like new in no time.
You will receive:
Choose from over 15 colors for you floor! Clear and custom color are available upon request. Bright colors such as red, yellow, white, and other lighter colors require greater pigmentation. Please inquire to find out pricing.
*Colors or gloss may be affected by high/low temperature, extreme lighting exposure. Clear version is available special order with UV inhibitors to prevent yellowing. Please call or email to order.
The Moisture Vapor Barrier two component 100% solids epoxy seal coat that can help control moisture vapor emission rates up to 20 lb/24hr/1000 ft prior to application of Vinyl sheets, Tiles, Cementitious overlays, Terrazo, Wood veneers, Carpet or polymeric coating systems.
This product meets the ASTM F3010 product requirements for vapor presence at the recommended thickness.
Color is only available in CLEAR . This product comes pre-packaged by weight. Kits should be mixed in their entirety. If partial kits are to be used, refer to the product TDS and instructions for proper mix ratios.
@ 15 mil thickness
@ 15 mil thickness
The Fast Set Water Based LOW VOC Epoxy Primer (013X) is a two component water based epoxy coating that exhibits excellent characteristics that rival solvent based products. This product has a tack free time of about 3 hours and can support traffic in as little as 6-12 hours.
It has good chemical resistance, abrasion resistance, and substrate penetration to withstand most common cleaning chemicals, solvents, fluids and other debris that will get on your floor. It features and easy to clean surface using a mop or wet-vac. Color is only available in CLEAR and the clear is not suitable as a topcoat for colored epoxies. Only suitable as a topcoat as a concrete sealer
This product comes pre-packaged by weight. Kits should be mixed in their entirety. If partial kits are to be used, refer to the product TDS and instructions for proper mix ratios. You will be able to coat appx 250 sq/ft per gallon at 6 Mils thickness. This primer attached meets the low voc specifications required in states such as CA.
We suggest using this primer if you are looking for a multiple layer coated floor as this allows for additional coats of epoxy to grip to this primer providing a stronger bond.
@ 5-7 mil thickness
@ 5-7 mil thickness
Colored Flakes are colored chips/flakes designed for use in seamless, resinous flooring systems. Flakes are produced from pigments, resin, filler, and additives. Available in a wide array of colors and...