Mortar Based Coating

We have a variety of urethane mortar and slurry coatings and products that can be used for patching, resurfacing or coating concrete.

+ Quick Shop

Commando Coat 400X - Super Thick Slurry Coating Kit $6.99

Commando Coat 400X - Super Thick Slurry Coating Kit

$6.99

Product Description

The Commando Coat 400X - Super Thick Slurry Coating Kit is an aggregate-enhanced, 4-component urethane slurry epoxy. Simply enter your desired square footage amount and the price will automatically be calculated.

This coating can withstand extremely high/low temperatures and is thermal shock proof providing a great coating for hot wash down areas. This is our thickest and most durable coating system! It features self-leveling capabilities and is formulated for older/corroded floors where there are high levels of pitting and smoothing out the floor is a main focus.

This thick aggregate-enhanced coating is used by commercial food packagers and some of the country’s largest breweries, wineries, and distilleries. It is highly resistant to damage due to it’s 8,400 psi compressive strength (about twice the strength of concrete!). This product is one of the best long term flooring solutions on the market.

Kit Components:

Urethane slurry cement epoxy kit (Part A, Part B, aggregate filler, and pigment pack)
Acid/chemical resistant military grade 2-part protective topcoat.
Broadcast media (Silica)

Instructions:

Mix up the contents of slurry kit (A, B, aggregate filler, and pigment pack)
Apply with gauge rake
While wet, broadcast silica sized “00” or “40” mesh until the floor begins to reject it. Application rate is appx. 10 lbs/kit, or ¼ lb/sq.ft. *We will send you the silica broadcast. For delivery please note these only come in 50lb bags.
Topcoat with the acid and chemical resistant military grade 2-part protective topcoat.

Notes:

Commando Coat 400X is highly resistant to moisture and can be applied to a damp floor. Extremely resistant to thermal shock from steam and hot water cleaning. Acid/chemical resistant protective topcoat included.
Commando Coat 400X requires the floor to be shot blasted for proper adhesion. Cannot be applied over existing coatings or tile.
Please note that you will need to add the pigment pack while you are mixing to tint the color of the epoxy. We supply you with the desired colored pigment pack.
Minimum sq.ft required to purchase is 800 square feet.

Only available in 3 colors. Tile Red, Medium Gray, and Tan

Key Features
Application Uses
Sizes and Coverage
Colors

Key Features

High Performance

Super Moisture and Chemical Resistant

Eco-Friendly

Complies with all current EPA standards

Strength

Thermal Shock Proof and 8,400 psi compressive strength

Thickness

Dries up to 125 mils thick (1/8 inch)

Temperature

Heat/Cold Resistant. Can be used in hot wash down areas

Wear Resistant

Extremely Scratch Resistant with the Pro Residential Standard Topcoat

Hot Tire Pickup

Extremely reliable against hot tire pickup

Easy to Clean

Just use soap and water to clean time and time again

Installation

Requires no special skills to apply

Application Uses

Chemical Factories
Processing plants
Breweries, Wineries, Distilleries
Food packaging plants
Beverage Packing facilities
Virtually any Floor!

Sizes and Coverage

Priced by the sq.ft

*Please note depending on how thick or thin you apply the coating coverage will vary. If your floor is more porous it will require more epoxy. If you are applying on new, smooth concrete then you will use less epoxy.

Colors

Kit Contents

Industrial roller pads
Industrial roller frames
Special ‘gauge rake’
Air release spiked roller to eliminate possible entrained air bubbles.
Mixing stick
Mixing bucket liner
Mixing bucket
Instructions
Pigment Pack
Silica broadcast media
Spike Shoes (for walking on wet floor during application)

View full product details

+ Quick Shop

Epoxy Mortar Patch Kit from $89.99

Epoxy Mortar Patch Kit

$89.99

Description

The Epoxy Mortar Patch Kit is a 3 component 100% solids epoxy mortar. Designed for application uses where excellent wear resistance and strength is necessary such as pallet jacks, forklifts, heavy traffic areas and steel-wheeled equipment.

Each kit is comprised of 2 components of A & B along with the special aggregate. All 3 components get mixed together to form the super strong and durable epoxy mortar that is troweled onto the floor. This product exhibits amazing adhesion and resists ‘pop out’ like cement-type patches.