| Container Size | 1 Quart, 1 Gal |
| Product Thickness | 2 Mils |
| Indoor / Outdoor | Indoor / Outdoor |
| Commercial / Residential | Commercial / Residential |
| Approx Coverage | 300-400 sq ft/gal |
| Application/Installation Method | Roller |
| Coating Type | Liquid primer |
| Min Optimal Temp | 35°F |
| Max Optimal Temp | 100°F |
| Substrate/Surface Material | Tile, vinyl, linoleum, fiberglass, ceramic, composite decking, glass, glazed block, wood, metal, cool deck |
| Dry To Touch Time | 30-45 mins |
| Time before Recoating | 3-4 hours |
| DIY Friendly | Yes |
| Sheen | Gloss |
| Protection Properties | Withstands high traffic |
Flash Bond Primer - See TDS
What is the coverage area of Flash Bond Primer?
One gallon of Flash Bond Primer covers approximately 200–400 square feet, depending on the surface porosity and texture.
Can Flash Bond Primer be applied on any surface?
Yes, Flash Bond Primer bonds to virtually any surface such as wood, metal, fiberglass, linoleum, ceramic, vinyl, composite decking, and glass.
Is Flash Bond Primer compatible with painted surfaces or vinyl siding?
Flash Bond Primer can be used on painted surfaces and vinyl siding, but it is strongly recommended to test a small area first to ensure compatibility.
Can Flash Bond Primer be used in wet areas like showers or hot tubs?
No, Flash Bond Primer is not recommended for use in showers, baths, hot tubs, or any areas with continuous or hot water exposure.
How should I prepare my floor before applying Flash Bond Primer?
Buff the surface and wipe it down with denatured alcohol before applying Flash Bond Primer to ensure proper adhesion.
How long does it take for Flash Bond Primer to dry?
Flash Bond Primer dries quickly and will appear off-white when fully dry.
The Flash Bond Primer is a specialized one part liquid primer. Used as a pre-treatment for bonding of virtually any coating (epoxies, urethanes, mortar, novolacs). If you have a porous floor or are unaware of the coating that currently exists then this product will work great as a primer for a featured coating. It bonds to metal, wood, tile, fiberglass, linoleum, vinyl, ceramic, glass, composite decking, and virtually any surface. It will dry as off-white and requires no special skills to install. Just roll or bush onto your surface.
Note: When applying on painted surfaces, plastic, or vinyl siding please ensure to test a small area prior, to assure that the underlying surface will not be affected. We do not recommend this product for use in hot tubs, showers, and baths. Please do not apply in areas where there is continuous or hot water present. Please make sure to wipe down with your floor with denatured alcohol (after you buff) before application.
Application Uses
