How to Clean Your Concrete Floor After Grinding

January 22, 2020

How to Clean Your Concrete Floor After Grinding

Approximately 65 percent of American adults own their homes. As time goes by, you may start to notice things about your home you want to change. Not only can taking on home improvement projects help you increase the value of your residence, it can also make it more appealing. If you are looking for a unique and cost-effective way to change the flooring in your residence, using an epoxy coat on your concrete subfloor may be a good idea.

The main thing you have to do when trying to have success with this type of flooring is to prep the concrete properly. Grinding the concrete is a great way to remove any textured edges that may exist. Once this grinding process is completed, you will need to clean the floor to remove the fine dust that was created. Here are some helpful tips on how to get this cleaning done properly.

Avoid Using a Household Vacuum

Naturally, homeowners want to use the items that are available to them when trying to clean up their concrete flooring. While this is acceptable, it can lead to lots of problems occurring. Trying to remove the fine concrete dust from the flooring with a household vacuum will be ineffective. Not only are these types of vacuums not strong enough to perform the job at hand, their filtration systems are set up to handle concrete dust.

Using a household vacuum will usually lead to the machine being damaged. This is why you need to think about renting an industrial vacuum. These machines are designed to handle tough jobs like this with ease. If you aren’t able to find one of these vacuums to rent, you may need to hire professionals with the right equipment to handle this job for you.

Check the Dust Collector’s Air Flow Rate

When trying to find a dust collector/vacuum to get your concrete floors cleaned, you will be faced with a number of options. Instead of rushing through the research process, take the time to find out more about each dust collector. Taking a look at the air flow rate a particular machine has is a great way to decide whether or not it is the right fit.

The higher the air flow rating is, the easier you will find it to get all of the dust up. While you may have to pay more for a machine with a high air flow rating, it will be worth it in the long run.

Getting Up Concrete Dust Takes Time

If you are new to the world of concrete grinding, you are probably unfamiliar with just how much dust can be created. You will have to run the dust collector/vacuum you rent across the floor a few times before all of the dust is up. The time and energy you invest in this cleaning process will be well worth it considering how easy it will make applying the epoxy.

Affordable Epoxy Coating

Are you looking for information about how to apply an epoxy coating to your floors? If so, be sure to check out our blog on this subject.

Leave a comment

Comments will be approved before showing up.