This Commercial Grade Floor Scraper makes getting rid of old tiles, paints, epoxies, mastic, carpet strips, glue, and any other residual dirt and grit easy and pain free. Cut down your floor prep time with the strengthened 6 foot long handle and 6 inch wide tempered steel blade with padded grips. We also sell replacements blades if you blade becomes dull.
This concrete prep tool will attach to any standard floor buffer to remove adhesives, mastic, paint, epoxies, dirt, grime and any other substance on your floor. This can be used an alternative method for floor preping instead of acid etching, diamond grinding (3-phase), or shot blasting.
The patented metallic blades are affixed to special plats that fit standard floor buffers. A #100 diamond grit tool (#25 grit is more aggressive. Available for special order) is bonded to metallic backing and assembled to a flexible, spring-steel blade. The flexible blade allows the diamond to remain in constant contact with the floor, maximizing the tools effectiveness.
New diamond particles are continuously exposed, retaining sharp edges throughout the life of the tool. This is a great DIY tool for an easy solution for your floor preparation needs.
This tool can be used on wet or dry surfaces!
Can be used on any concrete floor to remove:
Comes in standard size 15” diameter/CCW rotation and includes quick release hub for industry standard floor machines. Eliminates the need to etch the floor. Additional Sizes:
BF-1X is a three component 100% solids epoxy mortar designed for cove base surface applications. This product has specially selected aggregate and ingredients to provide easy construction of cove bases with the use of a marginal trowel or other cove base application tools. We include the Cover Mortar Primer with purchase of this product. We also sell the coving application tool we recommend for installation of this product.
The Crack Repair Putty is a two component 100% solids epoxy crack filler that you mix together to fill all types of cracks, dinges, joints expansions, and hairline fractures in your floor. It goes on like ‘spackle’ but is 5X stronger than concrete, and has 4X the bonding power to concrete vs. mortar type crack repairs. It can fill cracks up to 3/16″ deep and several inches wide without the use of aggregates.
To apply simply scoop out equal parts of “A” and “B” (mix ratio of 1:1) and mix on a piece of cardboard until evenly mixed. Then apply with putty knife or trowel just like you would with a painters spackle. It can be coated over IMMEDIATELY, even if the floor is not fully cured yet!
Coverage is 500 lineal feet of 1/8″ x 1/8″ size cracks for the qt size kit and 2,000 lineal feet for the 2 gal kit. You will get less coverage for larger cracks. This product is only available in gray. You can paint epoxy right over it!
Note: This product can also be used on vertical walls.
500 Lineal Feet
Colored Flakes are colored chips/flakes designed for use in seamless, resinous flooring systems. Flakes are produced from pigments, resin, filler, and additives. Available in a wide array of colors and...
The Epoxy Mortar Patch Kit is a 3 component 100% solids epoxy mortar. Designed for application uses where excellent wear resistance and strength is necessary such as pallet jacks, forklifts, heavy traffic areas and steel-wheeled equipment.
Each kit is comprised of 2 components of A & B along with the special aggregate. All 3 components get mixed together to form the super strong and durable epoxy mortar that is troweled onto the floor. This product exhibits amazing adhesion and resists ‘pop out’ like cement-type patches.
2 Gal Kit (.11 CU FT)
5.3 sq ft @ 1/4″ thick
5 Gal Kit (.45 CU FT)
21.6 sq ft @ 1/4″ thick
Bulk Kit (2.25 CU FT)
108 sq ft @ 1/4″ thick
The Epoxy Trak Textured Roller is required for use with the Super-Duty Epoxy Trak Coating Textured Version. This special roller allows the coating to be evenly distributed due to the textured granules. It also helps prevent uneven applications.
Coverage is 200 sq.ft per roller. This product comes in 4 inch and 9 inch versions.
Highly Durable Textured Roller
1 Textured Roller
200 square feet
The Fast Set Water Based LOW VOC Epoxy Primer (013X) is a two component water based epoxy coating that exhibits excellent characteristics that rival solvent based products. This product has a tack free time of about 3 hours and can support traffic in as little as 6-12 hours.
It has good chemical resistance, abrasion resistance, and substrate penetration to withstand most common cleaning chemicals, solvents, fluids and other debris that will get on your floor. It features and easy to clean surface using a mop or wet-vac. Color is only available in CLEAR and the clear is not suitable as a topcoat for colored epoxies. Only suitable as a topcoat as a concrete sealer
This product comes pre-packaged by weight. Kits should be mixed in their entirety. If partial kits are to be used, refer to the product TDS and instructions for proper mix ratios. You will be able to coat appx 250 sq/ft per gallon at 6 Mils thickness. This primer attached meets the low voc specifications required in states such as CA.
We suggest using this primer if you are looking for a multiple layer coated floor as this allows for additional coats of epoxy to grip to this primer providing a stronger bond.
@ 5-7 mil thickness
@ 5-7 mil thickness
The Flash Bond Primer is a specialized one part liquid primer. Used as a pre-treatment for bonding of virtually any coating (epoxies, urethanes, mortar, novolacs). If you have a porous floor or are unaware of the coating that currently exists then this product will work great as a primer for a featured coating. It bonds to metal, wood, tile, fiberglass, linoleum, vinyl, ceramic, glass, composite decking, and virtually any surface. It will dry as off-white and requires no special skills to install. Just roll or bush onto your surface. Flash Bond Primer is also used as a primer for ArmorTop Outdoor Coating for bare concrete or asphalt.
Note: When applying on painted surfaces, plastic, or vinyl siding please ensure to test a small area prior, to assure that the underlying surface will not be affected. We do not recommend this product for use in hot tubs, showers, and baths. Please do not apply in areas where there is continuous or hot water present. Please make sure to wipe down with your floor with denatured alcohol (after you buff) before application.
*Coverage will be affected by type of surface. It will cover less on porous or irregular surfaces such as asphalt.
The Flat Squeegee features an 18" inch wide frame that fits onto most standard paint sticks. Back roll with 1/4″ nap roller after applying with squeegee.
The flexible joint sealer is a two component hybrid containing both urethane and epoxy to provide a resilient filler for expansion joints and large cracks on concrete floors, garages, parking decks, highways, bridges, and marine applications. This product works great for filling those tough to cover joints that you want to make seamless. It comes two parts: a black component and a white component so proper mixing can be easily observed.
For larger joints, use foam ‘backer rod’ to support the joint filler.
| 2 Gal Kit
1/2” by 1.0” bead yields 60-70 lineal feet.
The curved hand trowel coving tool is designed for making 1/4" inch round coves on virtually any floor. This specially manufactured tool allows for you to make a smooth transition between the wall and the floor as needed. We recommend using this tool in bar backs, restaurants, cooking environment, or any other food processing type facility that requires such a cove to be present. This will help to avoid dirt, food, or any other waste being trapped on the surrounding floors edges. This product can be used with our Epoxy Mortar Resin Kit to make mortar or our Cove Mortar Kits.
We also carry cove strips. Please contact our office to find out more information.