Colored Flakes are colored chips/flakes designed for use in seamless, resinous flooring systems. Flakes are produced from pigments, resin, filler, and additives. Available in a wide array of colors and sizes to provide unique texture and color to coated surfaces.
Flecks are only sold in 5 lb increments and are 1/4″ size approximate
Choose from one of our preset mix and match favorites or feel free to order single or multiple colors of your choosing. If choosing a preset just select the corresponding preset number in the dropdown menu. If ordering a single or multiple colors please type the color name in the "FLECK" box. If you order 2 or more colors we will provide you with equal amounts of each color per 5 lb order.
Please note: Each order is 5 lbs, so for example, a quantity ordered of 2 would yield 10 lbs of flecks. Metallic flecks, glow in dark, and neon flecks are significantly higher priced and not avail through this listing. Please contact our office for pricing on metallic (silver & gold) flakes.
For instructions on how to apply flakes see our decorative flakes page here.
For a full-size chart that can be easily printed (print on glossy photo-type paper for truly accurate rendering) see the decorative flakes page through the link above.
*Other sized flakes are available upon special order such as 1″, 1/2″, 1/8″ & 1/16″.
The Oil Stop Primer is designed for floors where oils spills, grease, petroleum, and other alike chemicals or substances have penetrated deep into the concrete contaminating it. This unique 2 part primer allows epoxy coatings to bond the floor preventing beading on stained surfaces. This product works great with any our epoxy paint coatings but better than that this product will virtually work with any epoxy product on the market.
The aluminum oxide non skid additive (grit) is a powdered metal, super hard, non skid high wear additive is added to your coating to give it a super resistant non...
The Crack Repair Putty is a two component 100% solids epoxy crack filler that you mix together to fill all types of cracks, dinges, joints expansions, and hairline fractures in your floor. It goes on like ‘spackle’ but is 5X stronger than concrete, and has 4X the bonding power to concrete vs. mortar type crack repairs. It can fill cracks up to 3/16″ deep and several inches wide without the use of aggregates.
To apply simply scoop out equal parts of “A” and “B” (mix ratio of 1:1) and mix on a piece of cardboard until evenly mixed. Then apply with putty knife or trowel just like you would with a painters spackle. It can be coated over IMMEDIATELY, even if the floor is not fully cured yet!
Coverage is 500 lineal feet of 1/8″ x 1/8″ size cracks for the qt size kit and 2,000 lineal feet for the 2 gal kit. You will get less coverage for larger cracks. This product is only available in gray. You can paint epoxy right over it!
Note: This product can also be used on vertical walls.
500 Lineal Feet
The Epoxy Trak Textured Roller is required for use with the Commando Coat 500X - High Performance Flexible Urethane Coating. This special roller allows the coating to be evenly distributed due to the textured granules. It also helps prevent uneven applications.
Coverage is 200 sq.ft per roller. This product comes in 4 inch and 9 inch versions.
Highly Durable Textured Roller
1 Textured Roller
200 square feet