Products
Heavy Duty Cove Tool
$59.00
Description
The curved hand trowel coving tool is designed for making 1/4" inch round coves on virtually any floor. This specially manufactured tool allows for you to make a smooth transition between the wall and the floor as needed. We recommend using this tool in bar backs, restaurants, cooking environment, or any other food processing type facility that requires such a cove to be present. This will help to avoid dirt, food, or any other waste being trapped on the surrounding floors edges. This product can be used with our Epoxy Mortar Resin Kit to make mortar or our Cove Mortar Kits.
We also carry cove strips. Please contact our office to find out more information.
Key Features
Heavy-Duty Handle
- Allows for easy use, comfort and stability
Versatile
- Can be used on virtually any smooth surface
Reusable
- Just wash and clean the tool to use time and time again
Application Uses
- Bars
- Restaurants
- Cooking Environments
- Food Processing Facilities
- Breweries
- Wineries
- Garages
Heavy-Duty Concrete Prep Tool
$679.00
Description
This concrete prep tool will attach to any standard floor buffer to remove adhesives, mastic, paint, epoxies, dirt, grime and any other substance on your floor. This can be used an alternative method for floor prepping instead of acid etching, diamond grinding (3-phase), or shot blasting. Ideal for usage on extremely tough concrete floors where there are multiple layers of epoxy coatings or hard to remove coatings. This tool will last up to 4X time longer than the standard prep tool and can withstand up to 50,000 sq.ft of usage.
The patented metallic blades are affixed to special plats that fit standard floor buffers. A #100 diamond grit tool (#25 grit is more aggressive. Available for special order) is bonded to metallic backing and assembled to a flexible, spring-steel blade. The flexible blade allows the diamond to remain in constant contact with the floor, maximizing the tools effectiveness.
New diamond particles are continuously exposed, retaining sharp edges throughout the life of the tool. This is a great DIY tool for an easy solution for your floor preparation needs.
This tool can be used on wet or dry surfaces!
Key Features
Blades
- When blades are worn out easily replace them with new ones
Savings
- HD prep tool can save you up to 75% on floor prep costs
Adaptability
- Can be used with any standard floor buffer
Power
- Runs on 2 phase power outlet
Long Lasting
- Usage of up to 50,000 sq.ft
Safety
- Chemical free method for floor prepping
Reach
- Can reach those hard to get low spots in your floor
Environment
- Can be used wet so there is no dust
Application Uses
Can be used on any concrete floor to remove:
- Adhesives
- Epoxies
- Mastic
- Paint
- Dirt and Grime
Sizes
Comes in standard size 15” diameter/CCW rotation and includes quick release hub for industry standard floor machines. Eliminates the need to etch the floor. Additional Sizes:
| 15-inch | 16-inch | 17-inch | 18-inch | 19-inch | 20-inch |
High Solids Low Odor Urethane Topcoat
$369.99
Product Description
The High Solids Low Odor Urethane Topcoat is a three component high solids aliphatic urethane floor finish that exhibits excellent characteristics for abrasion resistance, chemical resistance, flexibility, weathering and UV stability. It has little to no odor making it a great topcoat for areas that require LOW VOCs and is legal for use in all 50 states.
This product comes in a kit with Part A & B and includes a pack of non skid Additive. Product is clear and is tintable with a urethane color pack. To make a color, you must make a selection on checkout and mix in the pack when mixing the product. Use 1 pint of color for each gallon of topcoat.
DO NOT APPLY THIS COATING WITHOUT FIRST USING A PRIMER OR BASECOAT.
For thin mil systems please use the Single Layer Epoxy Primer Low VOC in clear for clear coating OR in a color that matches the color pack of this product.
For high build systems please use 100% Solids High Build Coating in a matching color for the base coat.
Available in two sizes 1 gallon & 4 gallon. Coverage is approximately 500 sq ft/gal @ 3.2 mils wet.
Color packs available for this product line are white, off white, light gray, medium gray, charcoal gray, tile red, tan, light blue and blue
Instructional Video Below!
Key Features
High Performance
- Extremely durable to chemicals and cleaners
Eco-Friendly
- 2-component polyurethane. Complies with all current EPA standards
Long Lasting
- Our floors virtually never fail. Our Standard floor warranty is included on all flooring products
Thickness
- Dries up to 3 mils thick
Weather
- Proven tough against hostile work environments.
UV Stabilized
- Will not yellow over time
Anti Slip Surface
- Slip resistant with our non skid additive
Easy to Clean
- Just use soap and water to clean time and time again. auto service centers, warehouses, computer rooms, laboratories, aircraft hangers, cafeterias, and some chemical exposure areas.
Installation
- Simply mix and pour. Requires no special skills to apply
Application Uses
- Warehouses
- Auto Shops
- Computer Rooms
- Laboratories
- Aircraft Hangers
- Laundry Rooms
- Retail Showrooms
- Cafeterias
- Day Care Centers
- Virtually Any Concrete Floor
Coverage
|
1 Gallon 500 sq.ft @ 3 Mils |
4 Gallons 2000 sq.ft @ 3 Mils |
Colors
Color packs available for this product line are white, off white, light gray, medium gray, charcoal gray, tile red, tan, light blue and blue
Metal Power Mixer
$13.99 $17.99
This heavy duty metal power mixer attaches to any standard drill power drill to make mixing paint easy and pain free. This specially designed mixer allows paints to be throughly and completely giving you a consistent color and ensuring that all components are mixed thoroughly .
For larger joints, use foam ‘backer rod’ to support the joint filler.
Key Features
Design
- Specially designed to be sued for up to 5 Gal paint pails
Durability
- Extremely durable metal shaft
Size
- Fits 1/2 in. drills
Uses
- Can be used with a variety of paint products
Application Uses
- Can be used with any 5 Gal Pail
- Use for Epoxies, Novolacs, Urethane, Polyaspartics and more!
Moisture Vapor Barrier
$349.00
Product Description
The Moisture Vapor Barrier two component 100% solids epoxy seal coat that can help control moisture vapor emission rates up to 20 lb/24hr/1000 ft prior to application of Vinyl sheets, Tiles, Cementitious overlays, Terrazo, Wood veneers, Carpet or polymeric coating systems.
This product meets the ASTM F3010 product requirements for vapor presence at the recommended thickness.
Color is only available in CLEAR . This product comes pre-packaged by weight. Kits should be mixed in their entirety. If partial kits are to be used, refer to the product TDS and instructions for proper mix ratios.
Key Features
High Performance
- Helps control moisture vapor emission
VOC
- 100% Solids. No VOCs
Versatility
- Can be used in conjunction with most other Epoxy Central products as a primer to build up your flooring system
Shelf Life
- 1 Year in unopened containers
Easy to Clean
- Just use soap and water to clean time and time again
Installation
- Requires no special skills to apply
Application Uses
- Vinyl sheets
- Tiles
- Cementitious overlays
- Terrazo
- Wood veneers
- Carpet
- Polymeric coating systems.
- Virtually any surface
Size and Coverage
|
1.5 Gallons 150 sq.ft @ 15 mil thickness |
3 Gallons 300 sq.ft @ 15 mil thickness |
Colors
- CLEAR ONLY
Notched Squeegee
$49.99
Description
The Notched Squeegee features an 18" inch wide frame that fits onto most standard paint sticks.
Comes in 1/8″, 3/16″, 1/4" serrations available (larger serrations=lower spread coverage rate). After applying with squeegee back roll with 1/4″ nap roller
Key Features
Frame
- 18" inch wide metal frame
Blade
- Notched Blade allows paints to be evenly spread
Design
- Reinforced socket allows for maximum strength attachment to paint sticks
Application Uses
- Can be used with a variety of our products
Sizes
| 1/8" Inch | 3/16" Inch | 1/4" inch |
Oil Stop Primer
$119.00
Description
The Oil Stop Primer is designed for floors where oils spills, grease, petroleum, and other alike chemicals or substances have penetrated deep into the concrete contaminating it. This unique 2 part primer allows epoxy coatings to bond the floor preventing beading on stained surfaces. This product works great with any our epoxy paint coatings but better than that this product will virtually work with any epoxy product on the market.
Key Features
High Performance
- Super resistant against chemicals, car fluids, and cleaning products
Eco-Friendly
- 70% Solids
Thickness
- Dries up to 7 mils thick
Strength
- Super durable when used with our epoxy products. Allows for any even stronger bond between the floor and epoxy
Hot Tire Pickup
- Extremely reliable against hot tire pickup
Easy to Clean
- Just use soap and water to clean time and time again
Versatile
- Can be used with most epoxy products
Life Span
- Our floors virtually never fail. Our Standard floor warranty is included on all flooring products
Application Uses
- Residential
- Commercial
- Food and beverage Facilities
- Basements
- Equipment Rooms
- Virtually any concrete surface!
Coverage
|
1/2 Gal 100-125 sq.ft |
2 Gal 400-500 sq.ft |
Colors
Parking Pads
$19.95
Description
Our Parking Pads allow you car to sit even across your floor. These pads will help you park in the same exact spot each time to prevent car damage due to tight walls and low ceilings. It will also help prevent hot tire pickup which is one of leading causes of traditional epoxy coating failures.
The Parking Pad includes a self adhesive strip for secure floor attachment.
Note: Price is per pad.
Product Information
- Single Layer 2 Part 100% Solids High Build Epoxy Coating
Key Features
Durability
- Super durable
Maintenance
- Easy to clean with soap and water
Life Span
- Long Lasting. Simply replace one if worn out over years of use
Adhesive Strip
- Self Adhesive Strip prevents pad from moving
Installation
- No special Skills required for installation
Application Uses
- Residential Garages
- Commercial Garages
- Car Showrooms
- Covered Parking Sheds
Size
- 1 Size Only - 11 in. H x 2 in. L x 22 in. W
Polyurethane Military Grade Topcoat
$299.00
Product Description
The Polyurethane Military Grade Topcoat is a single layer 2 component flexible aliphatic polyurethane floor sealer that boosts excellent chemical and abrasion resistance. It works great against weather and is UV stabilized. It features a super resistant nonslip smooth finish that makes it extremely easy to clean using a mop or wet-vac.
This product has a 2:1 mix ratio by volume. Simply mix two gallons of part A with 1 gallon of part B and add the antislip aggregate to the mixture. Please make sure to mix thoroughly and only mix as much as you need so as not to waste. You will be able to coat appx 350 sq/ft per gallon at 5 mils thick.
This product can be used as a topcoat with most other Epoxy Central base and primer coatings and will add an extra protected non slip layer to your floor to help withstand the wear and tear it receives. You can choose to add decorative flecks to your flooring system. Simply add decorative flecks into the epoxy or primer before applying this coating to add texture, hide imperfections and give your floor that wow factor! Choose from hundreds of color variations
If you would like to add more texture to your floor coating please make sure to buy the armor-grip which is a nonskid additive that gets mixed into this topcoat. Simply pour 1 Package per Gallon and mix throughly into your topcoat mixture. Make sure to mix every couple of minutes as the non-skid will fall to the bottom of the mixture.
*Please note that VOC laws have recently changed. If you are located in one of these states please select the Low VOC version which is the same product but VOC compliant by EPA standards. CA, CT, DE, IL, IN, MD, MA, ME, NJ, NY, OH, PA, RI, VA, KY and all of Canada. If you do not select the Low VOC version and are located in one of the above states we will manually fill your order with the Low VOC version and adjust the price accordingly when processed.
**Colors or gloss may be affected by high/low temperature, extreme chemical and lighting exposure.
Key Features
High Performance
- Extremely durable to chemicals and cleaners
Eco-Friendly
- 2-component aliphatic polyurethane.
Thickness
- Dries up to 5 mils thick
Long Lasting
- Our floors virtually never fail. Our Standard floor warranty is included on all flooring products
Wear Resistant
- Super abrasion resistant while exemplifying great resistance against everyday use
UV Stabilized
- Will not yellow over time
Anti Slip Surface
- Slip resistant with our non skid additive
Easy to Clean
- Just use soap and water to clean time and time again
Installation
- Requires no special skills to apply
Application Uses
- Residential Garages
- Basements
- Storage Areas
- Pantries
- Home workstations
- Playrooms
Coverage
|
1½ Gallons 525 sq.ft |
3 Gallons 1,050 sq.ft |
15 Gallons 5,250 sq.ft |
Colors
Polyurethane Military Grade Topcoat Low VOC
$239.00
Product Description
The Polyurethane Military Grade Topcoat Low VOC is a single layer 2 component flexible aliphatic polyurethane floor sealer that boosts excellent chemical and abrasion resistance. It works great against weather and is UV stabilized. It features a super resistant nonslip smooth finish that makes it extremely easy to clean using a mop or wet-vac.
This product has a 2:1 mix ratio by volume. Simply mix two gallons of part A with 1 gallon of part B and add the antislip aggregate to the mixture. Please make sure to mix thoroughly and only mix as much as you need so as not to waste. You will be able to coat appx 350 sq/ft per gallon at 5 mils thick.
This product can be used as a topcoat with most other Epoxy Central base and primer coatings and will add an extra protected non slip layer to your floor to help withstand the wear and tear it receives. You can choose to add decorative flecks to your flooring system. Simply add decorative flecks into the epoxy or primer before applying this coating to add texture, hide imperfections and give your floor that wow factor! Choose from hundreds of color variations
If you would like to add more texture to your floor coating please make sure to buy the armor-grip which is a nonskid additive that gets mixed into this topcoat. Simply pour 1 Package per Gallon and mix throughly into your topcoat mixture. Make sure to mix every couple of minutes as the non-skid will fall to the bottom of the mixture.
*Please note that VOC laws have recently changed. If you are located in one of these states then this product is compliant by EPA standards. CA, CT, DE, IL, IN, MD, MA, ME, NJ, NY, OH, PA, RI, VA, KY and all of Canada.
**Colors or gloss may be affected by high/low temperature, extreme chemical and lighting exposure.
Key Features
High Performance
- Extremely durable to chemicals and cleaners
Eco-Friendly
- 2-component aliphatic polyurethane. Complies with all current EPA standards
Thickness
- Dries up to 5 mils thick
Long Lasting
- Our floors virtually never fail. Our Standard floor warranty is included on all flooring products
Resistance
- Abrasion resistant
UV Stabilized
- Will not yellow over time
Anti Slip Surface
- Slip resistant with our non skid additive
Easy to Clean
- Just use soap and water to clean time and time again
Installation
- Requires no special skills to apply
Application Uses
- Warehouses
- Garages
- Freight Entrances
- Broadcast Studios
- Laundry Rooms
- Retail Showrooms
- Muesuems
- Building Storage Areas
- Auto Shops
- Day Care Centers
- Docking Stations
- Boiler rooms
- Building Entry/Exit Pathways
Sizes and Coverage
|
1½ Gallons 50-550 sq.ft |
3 Gallons 1,000-1,100 sq.ft |
15 Gallons 5,000 -5,500 sq.ft |
Colors
PP100 - 1 Part Pool Paint
$119.00
Description
The PP100 - 1 Part Pool Paint is a no mix low VOC heavy duty pool paint. This product is super easy to use. Just open, pour and apply!
This coating is effective on both new and old pools, can be applied over existing chlorinated rubber pool paints, in addition to bare plaster and concrete surfaces. If you’ve just installed a new pool, or are simply repairing your old pool, the PP100 coating will help you complete your project faster as it does not require much time to dry. This coating is designed to last and will leave the internal surfaces of your pool stronger than ever and able to resist fading, chemicals, and abrasions over time.
Coverage is 300 square feet/gallon per coat (two coats required). Can be used on most coated surfaces except epoxy pool paint and Jacuzzis/spas, concrete or fiberglass. Please see the PP200 - 2 Part Pool Paint for these applications surfaces.
Available in White, Dawn Blue and Black. 1 Gal size only. Can be used with our Skid Tex non skid additive on areas such as steps and areas where slippage could be of concern. Two coats required!
One year warranty.
*PLEASE NOTE ORDERS ON THIS PRODUCT SHIP WITHIN 10-14 BUSINESS DAYS OF PURCHASE. IF YOU ARE SETTING A TIMELINE FOR YOUR PROJECT PLEASE TAKE SHIPPING TIMES INTO CONSIDERATION.
Key Features
One-Step application
- Easy to mix formula. 2x coats required for best results
UV Stable
- Color will last for up to 4 years before "chalking" begins to show
Semi Gloss Finish
- Semi-gloss and stain resistant finish.
Resistant to Chipping and Cracking
- Flexible coating does not chip or crack over time
Easy to Install
- No Special Skills Required for Installation.
Slip Resistant
- Textured coating for slip resistance
Application Uses
- Rubber pool coatings
- Synthetic rubber pool coatings
Coverage
|
1 Gal 300 sq.ft *2 coats required |
Colors
PP200 - 2 Part Pool Paint
$299.00
Description
***PLEASE NOTE THAT THIS PRODUCT IS ON BACKORDER DUE TO SUPPLY CHAIN ISSUES. ORDERS WILL BE TAKEN AND FULFILLED IN THE ORDER THEY ARE RECEIVED. APPROXIMATE SHIP DATE IS EARLY JULY 2022.
The PP200 - 2 Part Pool Paint an industrial grade 2-part epoxy high build coating formulated to give maximum protection to your swimming pool. Used by governments and municipalities for coating their pools. High solids formulation helps to hide minor divots and imperfections in surfaces and will ‘smooth out’ pool surfaces. This product is super easy to use. Just open, mix, pour and apply!
Satin finish. Self-priming, no primer required. The PP-200 coating is an economical alternative to replastering.
This coating can be applied over most types of epoxy pool coatings in good condition, as well as bare concrete, plaster, gunite and fiberglass. Can be used in jacuzzi’s and hot tubs.
Dries quickly, durable, and resists fading, blistering, chemicals and abrasion.
Mix ratio is 1:1. Designed for maximum protection against UV rays, automatic pool cleaning machines and chlorine.
Coverage is 75-125 square feet/gallon (150-250 sq.ft per kit) on initial coat. Each set includes 1 gallon of part A and 1 gallon of part B to make a 2 gal mix. This product will yield more on recoats. Coverage will be 125-200 sq ft/gal (250-400/kit). Two coats are required for maximum durability and warranty.
Life span can be 8-10 years!
2 year warranty!
Key Features
2-Step application
- Easy to mix formula. 1:1 Mix ratio. 2x coats required for best results
UV Stable
- Color will last for 8-10 years before "chalking" begins to show
Satin Finish
- Satin-gloss finish.
Resistant to Chipping and Cracking
- Flexible coating does not chip or crack over time
Easy to Install
- No Special Skills Required for Installation.
Warranty
- 2 Year Warranty!
Application Uses
- Epoxy Pool Coatings
- Bare Concrete
- Plaster
- Gunite
- Fiberglass
- Jacuzzis
- Houtubs
Coverage
|
1 Gal 75-125 sq.ft *2 coats required |
1 Kit (2 Gals) 150-250 sq.ft *2 coats required |
Colors