Pro Renew Wood and Concrete Resurfacer is a specially formulated eco-friendly textured liquid coating that can be applied to and wood or concrete surface to bring it back to life and avoid expensive replacement. This scientifically engineered formula is not a paint or stain, but a 1-part (no mixing) water based thick coating that is designed to be applied to wood or concrete surfaces that show imperfections and surface damage from weather conditions, sunlight exposure, moisture, cracks, mold, and discoloration. Pro Renew acts as a liquid resurfacing coating that ’sits’ on the surface but adheres tenaciously (unlike stains or paints that soak in, and epoxies that are not UV stable) and provides a brand new slip-resistant surface. Gives the effect of replacing at a fraction of the cost.
Available in 2 Gallon Kits. Lighter colors and older/more porous wood can yield less coverage. ‘Smooth’ high solids acrylic version is available for painting wood uprights, stairs and between boards. This product is available in 25 colors!
Please Note: This product is not recommended for areas that have standing water or where water does not drain properly. Contact our office for coatings for these types of areas. Pail contents 3.75 gals if not tinted, 4 gals with tint. Pro Renew Wood/Concrete Resurfacer is made in batches and color tints will vary slightly from batch to batch. Please make sure to order enough material for your entire job to avoid discoloration in future applications. If this color shift does occur, it can be corrected by putting on a coat of the Smooth Version).Pail contents 3.75 gals if not tinted, 4 gals with tint.
*2 coats are required for proper performance and warranty coverage. Please note that it is mandatory to use our special textured foam roller pad to apply for the warranty coverage.
Pro Renew Wood Primer is required for all applications to wood in order to obtain the lifetime warranty. Please use our Use our Pro Flash Bond Primer for composite (Trex type) decking.
50-100 sq.ft per gallon
*Lighter colors and older/more porous wood can yield less coverage
Super-Duty Trak is a tough, single-pack, totally flexible, slip-resistant, waterproof protective polyurethane coating with self-contained recycled rubber granules for an attractive tough textured finish. Simply enter your desired square footage amount and the price will automatically be calculated.
When exposed to atmospheric moisture, Super-Duty Epoxy Trak undergoes a chemical curing process which changes it from a liquid to a tough polyurethane membrane. It has excellent abrasion and chemical resistance. It is easy to apply, simply just roll it out! Ideal for boat decks, balconies, patios, houseboats, salt water exposure, docks, sidewalks, and thousands of other uses.
Super-Duty Epoxy Trak is available in 4 versions: Indoor Smooth @ $2.29/sq ft, Indoor Textured @ $3.29/sq ft, Outdoor Smooth @ $2.99/ft, and Outdoor Textured @ 3.99/sq ft. *Clear color is not available in indoor version, only outdoor. Textured includes 1 coat of smooth, 1 coat of textured.
Minimum order for Super-Duty Epoxy Trak is 150 square feet
If ordering Textured version, please order 1 textured roller per 200 square feet.
Please note that colors of textured Super-Duty Epoxy Trak are greatly affected by the addition of granules (which make it textured rather than smooth). We strongly advise you to order samples if color is an important factor.
*By the Square Foot. 150 sq.ft Minimum. Please note depending on how thick or thin you apply the coating coverage will vary.
The Epoxy Trak Textured Roller is required for use with the Super-Duty Epoxy Trak Coating Textured Version. This special roller allows the coating to be evenly distributed due to the the textured granules. It also helps prevent uneven applications.
Coverage is 200 sq.ft per roller. This product comes in 4 inch and 9 inch versions.
Highly Durable Textured Roller
1 Textured Roller
200 square feet
The Pro Renew Wood/Concrete Primer is single coat, super thick wood surface primer. The primer is manufactured to provide a strengthened bond to your wooden deck, patio, walkway or any wood outdoor surface. Simply mix in a can and roll on like regular paint. Let the paint dry to the touch and then apply the Pro Renew Wood/Concrete Resurfacer. This product also comes in a smooth version that has less grit and friction. Please contact us directly if you are interested.
Please Note: We highly suggest using this product as a primer to the Pro Renew Wood/Concrete Resurfacer. You do not need to use this primer on concrete surfaces.
*Primer is required on wood surfaces for lifetime warranty.
400-450 square feet per gallon
Applied with standard 3/8″ nap roller.
2,000-2,250 square feet per gallon
Applied with standard 3/8″ nap roller.
The Flex Super Fast Drying Industrial Polyaspartic Kit made by Spartacote is a 2 layer acid and chemical resistant polyaspartic coating system that dries within 1-2 hours of application. It is extremely durable against acids/chemicals, abrasions, hot/cold temperatures, oils, and fluids. It applies easily and requires no special skills to install.
This product features a 2 step process. First apply the polyaspartic coating with flecks (optional). Wait 2-3 hours for the coat to dry and then apply the super resistant topcoat. This system is best used where time is of the essence. Working time after mixing each batch is appx 20 minutes depending on temperature. The Super-Fast Drying Industrial Polyaspartic comes standard in 'clear' and is field tinted with our pigment packs. Colored Flecks can be added to this system but if you order this we will automatically fill the order will clear topcoat.
We give you everything you need to properly install your epoxy coating. This kit includes prep/etch solution, roller pad, mixing stick, non-skid additive, mixing bucket, decorative flecks, non-skid additive and instructions. The decorative (flecks) chips will hide imperfections and give your floor that wow factor!
Choose from over 15 colors for you floor! Clear and custom color are available upon request. Bright colors such as red, yellow, white, and other lighter colors require greater pigmentation. Please inquire to find out pricing.
Please type what color flecks you would like to add to your floor coating in the comments section. We include 3 lbs per 2 Gal Kit. You will throw the flecks onto your floor after you lay down the initial epoxy coating and then seal the floor with the clear topcoat.
1- 300 sq.ft (2 Gal Kit)
300-600 sq.ft (4 Gal Kit)
600+sq.ft (10 Gal Kit)
*Please note depending on how thick or thin you apply the coating coverage will vary. If your floor is more porous it will require more epoxy. If you are applying on new, smooth concrete then you will use less epoxy. Appx covergae is 150 sq.ft per Gal