This concrete prep tool will attach to any standard floor buffer to remove adhesives, mastic, paint, epoxies, dirt, grime and any other substance on your floor. This can be used an alternative method for floor preping instead of acid etching, diamond grinding (3-phase), or shot blasting.
The patented metallic blades are affixed to special plats that fit standard floor buffers. A #100 diamond grit tool (#25 grit is more aggressive. Available for special order) is bonded to metallic backing and assembled to a flexible, spring-steel blade. The flexible blade allows the diamond to remain in constant contact with the floor, maximizing the tools effectiveness.
New diamond particles are continuously exposed, retaining sharp edges throughout the life of the tool. This is a great DIY tool for an easy solution for your floor preparation needs.
This tool can be used on wet or dry surfaces!
Can be used on any concrete floor to remove:
Comes in standard size 15” diameter/CCW rotation and includes quick release hub for industry standard floor machines. Eliminates the need to etch the floor. Additional Sizes:
The Oil Stop Primer is designed for floors where oils spills, grease, petroleum, and other alike chemicals or substances have penetrated deep into the concrete contaminating it. This unique 2 part primer allows epoxy coatings to bond the floor preventing beading on stained surfaces. This product works great with any our epoxy paint coatings but better than that this product will virtually work with any epoxy product on the market.
The Epoxy Trak Textured Roller is required for use with the Super-Duty Epoxy Trak Coating Textured Version. This special roller allows the coating to be evenly distributed due to the textured granules. It also helps prevent uneven applications.
Coverage is 200 sq.ft per roller. This product comes in 4 inch and 9 inch versions.
Highly Durable Textured Roller
1 Textured Roller
200 square feet
The Crack Repair Putty is a two component 100% solids epoxy crack filler that you mix together to fill all types of cracks, dinges, joints expansions, and hairline fractures in your floor. It goes on like ‘spackle’ but is 5X stronger than concrete, and has 4X the bonding power to concrete vs. mortar type crack repairs. It can fill cracks up to 3/16″ deep and several inches wide without the use of aggregates.
To apply simply scoop out equal parts of “A” and “B” (mix ratio of 1:1) and mix on a piece of cardboard until evenly mixed. Then apply with putty knife or trowel just like you would with a painters spackle. It can be coated over IMMEDIATELY, even if the floor is not fully cured yet!
Coverage is 500 lineal feet of 1/8″ x 1/8″ size cracks for the qt size kit and 2,000 lineal feet for the 2 gal kit. You will get less coverage for larger cracks. This product is only available in gray. You can paint epoxy right over it!
Note: This product can also be used on vertical walls.
500 Lineal Feet
The Replacement 36" Application Head is a special 36” wide resin head that makes application of the Spartacote Super Fast Drying Epoxy Coating seamless and easy. This is a replacement head for the Super Fast Drying Epoxy Application Broom. It features flexible 2.5” poly bristles that make application of the Spartacote Super Fast Drying Epoxy Coating smooth.
36 " Super Fast Drying Epoxy Application Broom Head