Standard epoxies and polyurethanes make for great coating systems; However in environments that are subject to chemical and caustic cleaners such as wineries, breweries, and distilleries a different product is needed for long term floor stability. Our line of chemical and acid resistant novolac primers, topcoats, fillers, and DIY coating kits offer superior performance in these types of hostile environments.
$2.99
The Commando Coat 300X - Chemical and Acid Resistant Epoxy Novolac Coating Kit is a two layer acid and chemical resistant novolac coating system. Simply enter your desired square footage amount and the price will automatically be calculated.
This system features a single layer of enhanced epoxy novolac primer followed by a single layer of novolac topcoat. This 2 layer floor coating system is ideal for use in hostile environments where chemical/acid resistance is of the utmost importance. We suggest using this on chemical factories, breweries, wineries, distilleries, processing plants, battery storage rooms, chrome plating facilities, and other similar applications.
This 2 layer coating is specifically designed for application where splash/spill of acids, chemicals, and solvents occur frequently. The 2 layer build up strengthens your floor by allowing the primer ”grip” to the concrete and then letting the topcoat bond to the primer resulting in a super strong build of highly effective floor coatings. This floor can also withstand normal wear and tear, impact falls, PH cleaners, fluids, any other substance that might get onto your floor. It is super easy to clean, just use a mop or wet vac and have you floor looking like new in no time.
You will receive:
Choose from over 3 colors for you floor! Clear and custom color are available upon request. Bright colors such as red, yellow, white, and other lighter colors require greater pigmentation. Please inquire to find out pricing.
*Colors or gloss may be affected by high/low temperature, extreme lighting exposure. Clear version is available special order with UV inhibitors to prevent yellowing. Please call or email to order.
$6.99
The Commando Coat 400X - Super Thick Slurry Coating Kit is an aggregate-enhanced, 4-component urethane slurry epoxy. Simply enter your desired square footage amount and the price will automatically be calculated.
This coating can withstand extremely high/low temperatures and is thermal shock proof providing a great coating for hot wash down areas. This is our thickest and most durable coating system! It features self-leveling capabilities and is formulated for older/corroded floors where there are high levels of pitting and smoothing out the floor is a main focus.
This thick aggregate-enhanced coating is used by commercial food packagers and some of the country’s largest breweries, wineries, and distilleries. It is highly resistant to damage due to it’s 8,400 psi compressive strength (about twice the strength of concrete!). This product is one of the best long term flooring solutions on the market.
Kit Components:
Instructions:
Notes:
Only available in 3 colors. Tile Red, Medium Gray, and Tan
Priced by the sq.ft |
*Please note depending on how thick or thin you apply the coating coverage will vary. If your floor is more porous it will require more epoxy. If you are applying on new, smooth concrete then you will use less epoxy.
$2.29
Commando Coat 500X - High Performance Flexible Urethane Coating, single-pack, totally flexible, slip-resistant, waterproof protective polyurethane coating with self-contained recycled rubber granules for an attractive tough textured finish. Simply enter your desired square footage amount and the price will automatically be calculated.
When exposed to atmospheric moisture, Commando Coat 500X undergoes a chemical curing process which changes it from a liquid to a tough polyurethane membrane. It has excellent abrasion and chemical resistance. It is easy to apply, simply just roll it out! Ideal for boat decks, balconies, patios, houseboats, salt water exposure, docks, sidewalks, and thousands of other uses.
Commando Coat 500X is available in 4 versions: Indoor Smooth @ $2.29/sq ft, Indoor Textured @ $3.29/sq ft, Outdoor Smooth @ $2.99/ft, and Outdoor Textured @ 3.99/sq ft. *Clear color is not available in indoor version, only outdoor. Textured includes 1 coat of smooth, 1 coat of textured.
Minimum order is 150 square feet.
If ordering Textured version, please order 1 textured roller per 200 square feet.
Please note that colors of textured Commando Coat 500X are greatly affected by the addition of granules (which make it textured rather than smooth). We strongly advise you to order samples if color is an important factor.
Smooth |
Indoor |
*By the Square Foot. 150 sq.ft Minimum. Please note depending on how thick or thin you apply the coating coverage will vary.
$259.99
The Self Priming Chemical Resistant Epoxy Novolac Coating is a one layer 85% solids acid and chemical resistant novolac coating primer. This coating is single layer of enhanced epoxy novolac that offers great substrate penetration and low odor. Ideal usage as a primer for use in hostile environments where chemical/acid resistance is of the utmost importance such as chemical factories, processing plants, battery storage rooms, chrome plating facilities, and other similar applications.
This 1 layer coating is specifically designed for application where splash/spill of acids, chemicals, and solvents occur frequently. It can also withstand normal wear and tear, impact falls, PH cleaners, fluids, any other substance that might get onto your floor. It is super easy to clean, just use a mop or wet vac and have you floor looking like new in no time.
We suggest using this with the as the primer/base coat with the Chemical Resistant Epoxy Novolac Topcoat.
Clear and custom color are available upon request. Bright colors such as red, yellow, HH white, and other lighter colors require greater pigmentation. Please inquire to find out pricing.
*Colors or gloss may be affected by high/low temperature, extreme lighting exposure. Clear version is available special order with UV inhibitors to prevent yellowing. Please call or email to order.
1 ½ Gallons 250-275 sq.ft |
3 Gallons 500-550 sq.ft |
15 Gallons 2,475 - 2,625 sq.ft |
$309.00
The Chemical Resistant Epoxy Novolac Topcoat is a one layer 96% solids, acid and chemical resistant novolac coating topcoat sealer. Ideal for usage in hostile environments where chemical/acid resistance is of the utmost importance such as chemical factories, storage tanks, processing plants, battery storage rooms, chrome plating facilities, breweries, wineries and other similar applications.
This 1 layer coating is specifically designed for application where splash/spill of acids, chemicals, and solvents occur frequently. It can also withstand normal wear and tear, impact falls, PH cleaners, fluids, any other substance that might get onto your floor. It is super easy to clean, just use a mop or wet vac and have you floor looking like new in no time.
Custom color are available upon request. Bright colors such as red, yellow, white, and other lighter colors require greater pigmentation. Please inquire to find out pricing.
If you would like to add more texture to your floor coating please make sure to buy Ultra-wear nonskid additive that gets mixed into this topcoat. Simply pour 1 can per gallon and mix throughly into your topcoat mixture. Make sure to mix every couple of minutes as the non-skid will fall to the bottom of the mixture. Clear is available in 1 Gal quantity. coverage is appx. 100 sq.ft per/Gal.
*Colors or gloss may be affected by high/low temperature, extreme lighting exposure. Clear version is available special order with UV inhibitors to prevent yellowing. Please call or email to order.
1 ½ Gallons 125-175 sq.ft |
3 Gallons 250-350 sq.ft |
15 Gallons 1,250 - 1,750 sq.ft |
$499.00
The 72% Solids Super Fast Drying Polyaspartic Coating - made by Spartacote is a 2 layer acid and chemical resistant polyaspartic coating system that dries within 1-2 hours of application. It is extremely durable against acids/chemicals, abrasions, hot/cold temperatures, oils, and fluids. It applies easily and requires no special skills to install. Can be used outdoors as it does not yellow like epoxies. Gloss finish only (can be top-coated with the Flex SB Low Gloss for low gloss requirements. Please email directly to inquire). Working time 15-20 minutes under standard 70 degree conditions.
This product features a 2 step process. First apply the polyaspartic coating with flecks (optional). Wait 2-3 hours for the coat to dry and then apply a second coat. This coating is best used where time is of the essence. Working time after mixing each batch is appx 20 minutes depending on temperature. The Super-Fast Drying Industrial Polyaspartic comes standard in 'clear' and is field tinted with our pigment packs. Colored Flecks can be added to this system but if you order this we will automatically fill the order will clear gloss topcoat.
Product Information:
Choose from over 15 colors for you floor! Custom color are available upon request. Bright colors such as red, yellow, white, and other lighter colors require greater pigmentation. Please inquire to find out pricing.
Please type what color flecks you would like to add to your floor coating in the comments section. We include 3 lbs per 2 Gal Kit. You will throw the flecks onto your floor after you lay down the initial epoxy coating and then seal the floor with the clear gloss topcoat.
IF YOU DO NOT PROVIDE A FLECK COLOR WE WILL NOT SEND ANY FLECKS.
Please ensure to order proper amount per square footage needed for 2X coats. Ie. If you are covering a 500 sq.ft garage you will need 4 gallons of product.
Fore 100% solids version of this product please email us at info@epoxycentral.com for pricing.
2 Gal Set 500 sq.ft |
4 Gal Set 1000 sq/ft |
10 Gal Set 2500 sq/ft |
*Please note depending on how thick or thin you apply the coating coverage will vary. If your floor is more porous it will require more epoxy. If you are applying on new, smooth concrete then you will use less epoxy. Appx covergae is 250 sq.ft per Gal
$89.99
The Epoxy Mortar Patch Kit is a 3 component 100% solids epoxy mortar. Designed for application uses where excellent wear resistance and strength is necessary such as pallet jacks, forklifts, heavy traffic areas and steel-wheeled equipment.
Each kit is comprised of 2 components of A & B along with the special aggregate. All 3 components get mixed together to form the super strong and durable epoxy mortar that is troweled onto the floor. This product exhibits amazing adhesion and resists ‘pop out’ like cement-type patches.
2 Gal Kit (.11 CU FT) 5.3 sq ft @ 1/4″ thick |
5 Gal Kit (.45 CU FT) 21.6 sq ft @ 1/4″ thick |
Bulk Kit (2.25 CU FT) 108 sq ft @ 1/4″ thick |
$229.00
The flexible joint sealer is a two component hybrid containing both urethane and epoxy to provide a resilient filler for expansion joints and large cracks on concrete floors, garages, parking decks, highways, bridges, and marine applications. This product works great for filling those tough to cover joints that you want to make seamless. It comes two parts: a black component and a white component so proper mixing can be easily observed.
For larger joints, use foam ‘backer rod’ to support the joint filler.
2 Gal Kit 1/2” by 1.0” bead yields 60-70 lineal feet. |
$349.00
Product Description
The Moisture Vapor Barrier two component 100% solids epoxy seal coat that can help control moisture vapor emission rates up to 20 lb/24hr/1000 ft prior to application of Vinyl sheets, Tiles, Cementitious overlays, Terrazo, Wood veneers, Carpet or polymeric coating systems.
This product meets the ASTM F3010 product requirements for vapor presence at the recommended thickness.
Color is only available in CLEAR . This product comes pre-packaged by weight. Kits should be mixed in their entirety. If partial kits are to be used, refer to the product TDS and instructions for proper mix ratios.
1.5 Gallons 150 sq.ft @ 15 mil thickness |
3 Gallons 300 sq.ft @ 15 mil thickness |
$449.00
The 72% Solids Super Fast Drying Polyaspartic Coating - made by Spartacote is a 2 layer super resistant resistant polyaspartic coating system that dries within 1-2 hours of application. It is extremely durable against acids/chemicals, abrasions, hot/cold temperatures, oils, and fluids. It applies easily and requires no special skills to install. Can be used outdoors as it does not yellow like epoxies. Gloss finish only. Coverage approximately 250 square ft/gal. Please chose option for gloss or low gloss finish. This Kit comes in 2 Gal (Gloss) and 3.3 Gal Sets (Low Gloss).
Working time 20-25 minutes under standard 70 degree conditions.
Can be used as a topcoat or standalone coating. For colored/pigmented version see ‘Tintable Spartacote’ . Non skid additives can be added to the product or broadcast on. Two coats are required for best results.
Product Information:
Please ensure to order proper amount per square footage needed for 2X coats. Ie. If you are covering a 500 sq.ft garage you will need 4 gallons of product.
Fore 100% solids version of this product please email us at info@epoxycentral.com for pricing.
2 Gal Set 500 sq.ft |
*Please note depending on how thick or thin you apply the coating coverage will vary. If your floor is more porous it will require more epoxy. If you are applying on new, smooth concrete then you will use less epoxy. Appx coverage is 250 sq.ft per Gal
Sign up to get the latest on sales, new releases and more …
© 2023 Epoxy Central. All rights reserved Powered by Shopify