Commando Coat 400X - Super Thick Slurry Coating Kit
$6.99
Product Description
The Commando Coat 400X - Super Thick Slurry Coating Kit is an aggregate-enhanced, 4-component urethane slurry epoxy. Simply enter your desired square footage amount and the price will automatically be calculated.
This coating can withstand extremely high/low temperatures and is thermal shock proof providing a great coating for hot wash down areas. This is our thickest and most durable coating system! It features self-leveling capabilities and is formulated for older/corroded floors where there are high levels of pitting and smoothing out the floor is a main focus.
This thick aggregate-enhanced coating is used by commercial food packagers and some of the country’s largest breweries, wineries, and distilleries. It is highly resistant to damage due to it’s 8,400 psi compressive strength (about twice the strength of concrete!). This product is one of the best long term flooring solutions on the market.
Kit Components:
- Urethane slurry cement epoxy kit (Part A, Part B, aggregate filler, and pigment pack)
- Acid/chemical resistant military grade 2-part protective topcoat.
- Broadcast media (Silica)
Instructions:
- Mix up the contents of slurry kit (A, B, aggregate filler, and pigment pack)
- Apply with gauge rake
- While wet, broadcast silica sized “00” or “40” mesh until the floor begins to reject it. Application rate is appx. 10 lbs/kit, or ¼ lb/sq.ft. *We will send you the silica broadcast. For delivery please note these only come in 50lb bags.
- Topcoat with the acid and chemical resistant military grade 2-part protective topcoat.
Notes:
- Commando Coat 400X is highly resistant to moisture and can be applied to a damp floor. Extremely resistant to thermal shock from steam and hot water cleaning. Acid/chemical resistant protective topcoat included.
- Commando Coat 400X requires the floor to be shot blasted for proper adhesion. Cannot be applied over existing coatings or tile.
- Please note that you will need to add the pigment pack while you are mixing to tint the color of the epoxy. We supply you with the desired colored pigment pack.
- Minimum sq.ft required to purchase is 800 square feet.
Only available in 3 colors. Tile Red, Medium Gray, and Tan
Key Features
High Performance
- Super Moisture and Chemical Resistant
Eco-Friendly
- Complies with all current EPA standards
Strength
- Thermal Shock Proof and 8,400 psi compressive strength
Thickness
- Dries up to 125 mils thick (1/8 inch)
Temperature
- Heat/Cold Resistant. Can be used in hot wash down areas
Wear Resistant
- Extremely Scratch Resistant with the Pro Residential Standard Topcoat
Hot Tire Pickup
- Extremely reliable against hot tire pickup
Easy to Clean
- Just use soap and water to clean time and time again
Installation
- Requires no special skills to apply
Application Uses
- Chemical Factories
- Processing plants
- Breweries, Wineries, Distilleries
- Food packaging plants
- Beverage Packing facilities
- Virtually any Floor!
Sizes and Coverage
| Priced by the sq.ft |
*Please note depending on how thick or thin you apply the coating coverage will vary. If your floor is more porous it will require more epoxy. If you are applying on new, smooth concrete then you will use less epoxy.
Colors
Kit Contents
- Industrial roller pads
- Industrial roller frames
- Special ‘gauge rake’
- Air release spiked roller to eliminate possible entrained air bubbles.
- Mixing stick
- Mixing bucket liner
- Mixing bucket
- Instructions
- Pigment Pack
- Silica broadcast media
- Spike Shoes (for walking on wet floor during application)
Related Items
Commando Coat 300X - Chemical and Acid Resistant Epoxy Novolac Coating Kit
$2.99
Product Description
The Commando Coat 300X - Chemical and Acid Resistant Epoxy Novolac Coating Kit is a two layer acid and chemical resistant novolac coating system. Simply enter your desired square footage amount and the price will automatically be calculated.
This system features a single layer of enhanced epoxy novolac primer followed by a single layer of novolac topcoat. This 2 layer floor coating system is ideal for use in hostile environments where chemical/acid resistance is of the utmost importance. We suggest using this on chemical factories, breweries, wineries, distilleries, processing plants, battery storage rooms, chrome plating facilities, and other similar applications.
This 2 layer coating is specifically designed for application where splash/spill of acids, chemicals, and solvents occur frequently. The 2 layer build up strengthens your floor by allowing the primer ”grip” to the concrete and then letting the topcoat bond to the primer resulting in a super strong build of highly effective floor coatings. This floor can also withstand normal wear and tear, impact falls, PH cleaners, fluids, any other substance that might get onto your floor. It is super easy to clean, just use a mop or wet vac and have you floor looking like new in no time.
You will receive:
- Base/Primer Coat - Self Priming Chemical Resistant Epoxy Novolac Coating
- Topcoat - Chemical Resistant Epoxy Novolac Topcoat
Choose from over 3 colors for you floor! Clear and custom color are available upon request. Bright colors such as red, yellow, white, and other lighter colors require greater pigmentation. Please inquire to find out pricing.
*Colors or gloss may be affected by high/low temperature, extreme lighting exposure. Clear version is available special order with UV inhibitors to prevent yellowing. Please call or email to order.
EACH KIT INCLUDES
- Prep/etch solution for prepping the floor
- Roller pad
- Roller frame
- Mixing stick/Metal Mixer
- Non-skid additive
- Mixing Bucket with liner
- Instructions
- Spike Shoes* (only comes with the purchase of 1000 sq/ft or more)
Key Features
High Performance
- Super High Chemical/Acid Resistant
Eco-Friendly
- Low Odor. Complies with all current EPA standards
Thickness
- Dries up to 15-20 mils thick
Long Lasting
- Our floors virtually never fail. Our Standard floor warranty is included on all flooring products
Temperature
- Can be used in hot wash down areas
Finish
- Attractive High-Gloss Finish
Anti Slip Surface
- Use our non skid additive to increase traction of the floor
Easy to Clean
- Just use soap and water to clean time and time again
Installation
- Requires no special skills to apply
Application Uses
- Chemical Factories
- Storage Tanks
- Breweries, Wineries, Distilleries
- Food Processing plants
- Battery Storage Rooms
- Chrome plating facilities
- Other similar applications
Coverage
Colors
Commando Coat 500X - High Performance Flexible Urethane Coating Kit
$2.29
Product Description
Commando Coat 500X - High Performance Flexible Urethane Coating, single-pack, totally flexible, slip-resistant, waterproof protective polyurethane coating with self-contained recycled rubber granules for an attractive tough textured finish. Simply enter your desired square footage amount and the price will automatically be calculated.
When exposed to atmospheric moisture, Commando Coat 500X undergoes a chemical curing process which changes it from a liquid to a tough polyurethane membrane. It has excellent abrasion and chemical resistance. It is easy to apply, simply just roll it out! Ideal for boat decks, balconies, patios, houseboats, salt water exposure, docks, sidewalks, and thousands of other uses.
Commando Coat 500X is available in 4 versions: Indoor Smooth @ $2.29/sq ft, Indoor Textured @ $3.29/sq ft, Outdoor Smooth @ $2.99/ft, and Outdoor Textured @ 3.99/sq ft. *Clear color is not available in indoor version, only outdoor. Textured includes 1 coat of smooth, 1 coat of textured.
Minimum order is 150 square feet.
If ordering Textured version, please order 1 textured roller per 200 square feet.
Please note that colors of textured Commando Coat 500X are greatly affected by the addition of granules (which make it textured rather than smooth). We strongly advise you to order samples if color is an important factor.
Product Information
- Single Layer Flexible Protective polyurethane Coating with self-contained recycled rubber granules
Key Features
Components
- One-Part No mixing of components
Chip Resistant
- Flexible (Chip Peel and Flake resistant)
Repairs
- Easy Repairs (Bonds to itself)
Thickness
- Dries 30-40 mils thick
Resistance
- Acid/Chemical resistant
UV
- Highly resistant to UV exposure and salts
Cleaning
- Easy to clean surface. Simply use water and soap
Dry Time
- Fast Drying (foot traffic in 6-12 hours after coat)
Long Lasting
- Our floors virtually never fail. Our Standard floor warranty is included on all flooring products
Installation
- No special Skills required for installation
Application Uses
- Warehouses
- Commercial
- Military hangers
- Pedestrian walkways
- Truck beds
- Ramps
- Loading docks
- Bridges
- Metal and Wooden Steps
- Catwalks
- Ship Decks
- Marine applications
- Boats
- Storage tanks
- Handicap ramps
- Pools and spas
- Sealing rusty pipes
- Playgrounds
- Freight elevators
- Tool handles
- Roofing
- Vehicle undercoating
- Curb ramps
- Parking lots
- The list is endless!
Coverage
|
Smooth |
Indoor |
*By the Square Foot. 150 sq.ft Minimum. Please note depending on how thick or thin you apply the coating coverage will vary.
Colors
Kit Contents
- Prep/etch solution for prepping the floor
- Roller pad
- Roller frame
- Mixing stick/Metal Mixer
- Non-skid additive
- Mixing Bucket with liner
- Instructions
- Spike Shoes
Self Priming Chemical Resistant Epoxy Novolac Coating
$259.99
Product Description
The Self Priming Chemical Resistant Epoxy Novolac Coating is a one layer 85% solids acid and chemical resistant novolac coating primer. This coating is single layer of enhanced epoxy novolac that offers great substrate penetration and low odor. Ideal usage as a primer for use in hostile environments where chemical/acid resistance is of the utmost importance such as chemical factories, processing plants, battery storage rooms, chrome plating facilities, and other similar applications.
This 1 layer coating is specifically designed for application where splash/spill of acids, chemicals, and solvents occur frequently. It can also withstand normal wear and tear, impact falls, PH cleaners, fluids, any other substance that might get onto your floor. It is super easy to clean, just use a mop or wet vac and have you floor looking like new in no time.
We suggest using this with the as the primer/base coat with the Chemical Resistant Epoxy Novolac Topcoat.
Clear and custom color are available upon request. Bright colors such as red, yellow, HH white, and other lighter colors require greater pigmentation. Please inquire to find out pricing.
*Colors or gloss may be affected by high/low temperature, extreme lighting exposure. Clear version is available special order with UV inhibitors to prevent yellowing. Please call or email to order.
Key Features
High Performance
- Super High Chemical/Acid Resistant
Eco-Friendly
- 85% Solids. Complies with all current EPA standards
Thickness
- Dries up to 5 mils thick
Long Lasting
- Our floors virtually never fail. Our Standard floor warranty is included on all flooring products
Wear Resistant
- Exemplifies great resistance against everyday use
Temperature
- Can be used in hot washdown areas
Hot Tire Pickup
- Extremely reliable against hot tire pickup
Anti Slip Surface
- Slip resistant with our non skid additive
Easy to Clean
- Just use soap and water to clean time and time again
Installation
- Requires no special skills to apply
Application Uses
- Chemical Factories
- Breweries, Wineries, Distilleries
- Food Processing plants
- Battery Storage Rooms
- Chrome plating facilities
- Other similar applications
Coverage
|
1 ½ Gallons 250-275 sq.ft |
3 Gallons 500-550 sq.ft |
15 Gallons 2,475 - 2,625 sq.ft |
Colors