The Commando Coat 400X - Super Thick Slurry Coating Kit is an aggregate-enhanced, 4-component urethane slurry epoxy. Simply enter your desired square footage amount and the price will automatically be calculated.
This coating can withstand extremely high/low temperatures and is thermal shock proof providing a great coating for hot wash down areas. This is our thickest and most durable coating system! It features self-leveling capabilities and is formulated for older/corroded floors where there are high levels of pitting and smoothing out the floor is a main focus.
This thick aggregate-enhanced coating is used by commercial food packagers and some of the country’s largest breweries, wineries, and distilleries. It is highly resistant to damage due to it’s 8,400 psi compressive strength (about twice the strength of concrete!). This product is one of the best long term flooring solutions on the market.
Only available in 3 colors. Tile Red, Medium Gray, and Tan
|Priced by the sq.ft|
*Please note depending on how thick or thin you apply the coating coverage will vary. If your floor is more porous it will require more epoxy. If you are applying on new, smooth concrete then you will use less epoxy.
The Oil Stop Primer is designed for floors where oils spills, grease, petroleum, and other alike chemicals or substances have penetrated deep into the concrete contaminating it. This unique 2 part primer allows epoxy coatings to bond the floor preventing beading on stained surfaces. This product works great with any our epoxy paint coatings but better than that this product will virtually work with any epoxy product on the market.
The Polyurethane Military Grade Topcoat Low VOC is a single layer 2 component flexible aliphatic polyurethane floor sealer that boosts excellent chemical and abrasion resistance. It works great against weather and is UV stabilized. It features a super resistant nonslip smooth finish that makes it extremely easy to clean using a mop or wet-vac.
This product has a 2:1 mix ratio by volume. Simply mix two gallons of part A with 1 gallon of part B and add the antislip aggregate to the mixture. Please make sure to mix thoroughly and only mix as much as you need so as not to waste. You will be able to coat appx 350 sq/ft per gallon at 5 mils thick.
This product can be used as a topcoat with most other Epoxy Central base and primer coatings and will add an extra protected non slip layer to your floor to help withstand the wear and tear it receives. You can choose to add decorative flecks to your flooring system. Simply add decorative flecks into the epoxy or primer before applying this coating to add texture, hide imperfections and give your floor that wow factor! Choose from hundreds of color variations
If you would like to add more texture to your floor coating please make sure to buy the armor-grip which is a nonskid additive that gets mixed into this topcoat. Simply pour 1 Package per Gallon and mix throughly into your topcoat mixture. Make sure to mix every couple of minutes as the non-skid will fall to the bottom of the mixture.
*Please note that VOC laws have recently changed. If you are located in one of these states then this product is compliant by EPA standards. CA, CT, DE, IL, IN, MD, MA, ME, NJ, NY, OH, PA, RI, VA, KY and all of Canada.
**Colors or gloss may be affected by high/low temperature, extreme chemical and lighting exposure.
5,000 -5,500 sq.ft
The Epoxy Trak Textured Roller is required for use with the Commando Coat 500X - High Performance Flexible Urethane Coating. This special roller allows the coating to be evenly distributed due to the textured granules. It also helps prevent uneven applications.
Coverage is 200 sq.ft per roller. This product comes in 4 inch and 9 inch versions.
Highly Durable Textured Roller
1 Textured Roller
200 square feet